18psi

iTrader: (76)

Welcome to the club

And are those ID1000's you're running?

Ryan_G

iTrader: (8)

I wish they would make E85 accessible around me. There are two stations within 15 miles.... one is on a military base and not publicly accessible and the other is at some random station that I believe is only for commercial use or something. It would be nice to have the extra cushion especially when I go to the track.

soviet

iTrader: (10)

That sucks. I'm moving to Norfolk in August and the E85 station there is also at a military base... but they made it publicly accessible! w00t.

Today, I was doing some mind street tuning - just cruise, idle control, etc not pulls or anything. My boost solenoid wiring fell apart somewhere - no power to the solenoid. So I turned off boost control. Well, today, driving, the power decided to come back.

...and then I accidentally 27.3psi

Oscar

iTrader: (2)

Lol, in soviet russia, boost hit you

Zaphod

27psi at 4.400 rpm - not bad!

soviet

iTrader: (10)

Except... I hit 25psi by 3500rpm

The point of the 27psi is that it was accidental.

timk

This car is so badass. I keep trying to stop myself looking at this thread because it makes me wake up thinking I need more EFR in my life.

soviet

iTrader: (10)

Thanks! I think it's a great street car

Changed AFR target to more E85-like targets (e.g. 12.2 in boost). Went to do some pulls/street tuning at 5am. Checked Virtual Dyno and it says I make exact same power as I did in October on virtually same settings.


Sounds good to me
Time to add a buttload more timing!

p.s. increasing target AFR from ~11.7 to ~12.2 lowered my duty cycle 3%. Aw yeah

Efini~FC3S

iTrader: (4)

Poor turbo...it wants to run at 25psi+.

Running it at 16psi must be such a tease for the turbo.

I wonder how mine will like it at ~8psi...

Also, I vote that your "low boost" setting be 18psi. For obvious reasons.

Leafy

iTrader: (1)

It wont, I'm on a 6psi wastegate with the ebc turned off and I still hit 10psi at peak power. And watch the orientation of the down pipe clamp if you use a non factory actuator mine was hitting and limiting throw.

muoto

More boost! Even I made ~340whp virtualdyno graph with .64 gt2871 and 15psi

soviet

iTrader: (10)

fancypants intake and thick, Finnish air must be the reason

car still having issues with battery/alternator. It doesn't seem to keep it's charge when driving the car.
some facts:
- drain on the battery when car is off is 1.5mA which is pretty much nothing
- battery seems to be fine. its a 2 year old BOSCH AGM battery. Left it charging for 15 hours. Went from 11.08V to 12.85V, which is like 95-100% charged for an AGM battery.
- alternator - the voltage while running never gets above 13.6V or so
- I have been mostly driving at night with lights on

So what I think is that the alternator needs to be replaced?

18psi

iTrader: (76)

Get an rx7 unit

soviet

iTrader: (10)

how many FD RX7s are you going to find at a junkyard?
how many 626s, MX3s and Probes are you going to find at a junkyard?

18psi

iTrader: (76)

you can't order one through like an auto parts store?

or car-part.com
or rockauto
or
or

soviet

iTrader: (10)

Sure I can
$130 + $40 core charge.
-vs-
$20 at a pick and pull

I need a new fender anyways - more reason to go to a junk yard

soviet

iTrader: (10)

example: 90A alternator interchange from RockAuto

Buyer's Guide: USA INDUSTRIES 516863 Alternator / Generator
FORD PROBE (1993 - 1997)
MAZDA 626 (1993 - 2002)
MAZDA MX-3 (1992 - 1995)
MAZDA MX-6 (1993 - 1997)
MAZDA RX-7 (1993 - 1995)

18psi

iTrader: (76)

lol you spend more than that on weekend ladyboys

soviet

iTrader: (10)

I like ze best but I also likes savings ze money

Leafy

iTrader: (1)

Whats so awesome about the rx7 alt? Is it lighter? Please tell me its lighter. I was so tempted to take the angle grinder to the stock one the last time I had it out.