Will this drain burn oil?
#1
Junior Member
Thread Starter
iTrader: (1)
Join Date: Sep 2011
Location: Beantown
Posts: 159
Total Cats: 1
Will this drain burn oil?
My turbo is draining through a short -10 AN line into a +/-135 degree elbow tapped into the oil-pan. I tapped the return higher than the standard location because i removed the AC compressor.
Because of the angle in the -10AN head and the angle in the return bung, the line dips about 1/2". Will there be enough positive head here to gravity feed correctly or am I looking at a case of oil stagnation in the dip?
I don't really want to get a straight bung and cut a longer piece of hose but will do so if this setup will create a real oil burn issue.
Because of the angle in the -10AN head and the angle in the return bung, the line dips about 1/2". Will there be enough positive head here to gravity feed correctly or am I looking at a case of oil stagnation in the dip?
I don't really want to get a straight bung and cut a longer piece of hose but will do so if this setup will create a real oil burn issue.
Thread
Thread Starter
Forum
Replies
Last Post
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM
stoves
Suspension, Brakes, Drivetrain
5
04-21-2016 03:00 PM
JesseTheNoob
DIY Turbo Discussion
15
09-30-2015 02:44 PM