Cost Of Parts Thus Far!
#1
Cost Of Parts Thus Far!
Here's what I have so far:
1-BEGI MANIFOLD-305 SHIPPED - www.Bellengineering.net
2-SAAB IC-40 SHIPPED-EBAY
3-EMANAGE W/ MAIN HARNESSES-FREE FROM FRIEND
4-SUPRA MK2 LIGHT GREEN BACKS-60 SHIPPED-EBAY
5-TYPE-S BV-135 SHIPPED-EBAY
6-VORTECH FMU-80 SHIPPED-EBAY
7-SR20 TURBO-125 SHIPPED-EBAY
8-OIL FEED,RETURN, AND COOLENT LINES -45 SHIPPED-EBAY
9-TURBO FITTINGS-80 SHIPPED-www.customsteel.com/sr20/html/turbo_fittings.html
10-TURBO INLET AND OUTLET ELBOWS-40 SHIPPED-EBAY
11-FAZE BOOST GAUGE-60
12-FAZE OIL PRESSURE GAUGE-60
13-ONE STEP COLDER NGK PLUGS
total:1,100 and some change
I still need the following:
1-Innovative wide-band controller
2-stage 1 spec miata clutch-http://www.jdsperformance.com/spec.asp?make=Mazda&model=Miata&fcmd=cars
3-2.5 custom downpipe
4-water temp guage
5-fuel pump
6-new custom 2.5 inch exuast system
7-brake pads(ceramic race)
8-flywheel
Anything else I should add to this list!!
1-BEGI MANIFOLD-305 SHIPPED - www.Bellengineering.net
2-SAAB IC-40 SHIPPED-EBAY
3-EMANAGE W/ MAIN HARNESSES-FREE FROM FRIEND
4-SUPRA MK2 LIGHT GREEN BACKS-60 SHIPPED-EBAY
5-TYPE-S BV-135 SHIPPED-EBAY
6-VORTECH FMU-80 SHIPPED-EBAY
7-SR20 TURBO-125 SHIPPED-EBAY
8-OIL FEED,RETURN, AND COOLENT LINES -45 SHIPPED-EBAY
9-TURBO FITTINGS-80 SHIPPED-www.customsteel.com/sr20/html/turbo_fittings.html
10-TURBO INLET AND OUTLET ELBOWS-40 SHIPPED-EBAY
11-FAZE BOOST GAUGE-60
12-FAZE OIL PRESSURE GAUGE-60
13-ONE STEP COLDER NGK PLUGS
total:1,100 and some change
I still need the following:
1-Innovative wide-band controller
2-stage 1 spec miata clutch-http://www.jdsperformance.com/spec.asp?make=Mazda&model=Miata&fcmd=cars
3-2.5 custom downpipe
4-water temp guage
5-fuel pump
6-new custom 2.5 inch exuast system
7-brake pads(ceramic race)
8-flywheel
Anything else I should add to this list!!
#6
thats damned good
im in about $3-4k if i add everything up
tec3 from another project "free" but cost $2300 3 years ago
tec3 sensors and **** $300
pulsar 444cc injectors free
pulsar top mount ic free
manifold $400
silvia turbo and fittings $500
I still have to get my intercooler and exhaust piping done so im expecting another $500-700 (shipping to the CI is expensive)
youre doing DAMN great
im in about $3-4k if i add everything up
tec3 from another project "free" but cost $2300 3 years ago
tec3 sensors and **** $300
pulsar 444cc injectors free
pulsar top mount ic free
manifold $400
silvia turbo and fittings $500
I still have to get my intercooler and exhaust piping done so im expecting another $500-700 (shipping to the CI is expensive)
youre doing DAMN great
#7
thats damned good
im in about $3-4k if i add everything up
tec3 from another project "free" but cost $2300 3 years ago
tec3 sensors and **** $300
pulsar 444cc injectors free
pulsar top mount ic free
manifold $400
silvia turbo and fittings $500
I still have to get my intercooler and exhaust piping done so im expecting another $500-700 (shipping to the CI is expensive)
youre doing DAMN great
im in about $3-4k if i add everything up
tec3 from another project "free" but cost $2300 3 years ago
tec3 sensors and **** $300
pulsar 444cc injectors free
pulsar top mount ic free
manifold $400
silvia turbo and fittings $500
I still have to get my intercooler and exhaust piping done so im expecting another $500-700 (shipping to the CI is expensive)
youre doing DAMN great
WOW! thats alot of dough , hopfully I can keep under 2500..my clutch should run me about 290 shipped, my wideband im hoping to find one used for under 200 or new ,Im hoping i can find a used fidanza flywheel on ebay...the water temp gauge I can find for cheap I know that, under 30-40 bucks maybe, I found a shop in my area that will fab me a 2.5 downpipe and exaust for 400 total and I think My ic piping is going to run me in the area of 200..Not sure though!
Thread
Thread Starter
Forum
Replies
Last Post
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM
stoves
Suspension, Brakes, Drivetrain
5
04-21-2016 03:00 PM