DIY Turbo Discussion greddy on a 1.8? homebrew kit?

Can't find a boost leak

Thread Tools
 
Search this Thread
 
Old 07-02-2017, 10:58 AM
  #1  
Newb
Thread Starter
 
estephens13's Avatar
 
Join Date: Jan 2010
Location: Houston
Posts: 38
Total Cats: -2
Question Can't find a boost leak

So on my 99 I hooked up a boost tester and I have a huge leak somewhere between the egr and fuel rail area from the underside (maxing out at 5 psi). The egr tube is cut and filtered and its not leaking from there. I also just replaced the vacuum line with the check valve hidden under the upper intake, and its not from the fuel injectors. Can the egr leak and it not be through the tube? Any other ideas?
estephens13 is offline  
Old 07-03-2017, 12:31 AM
  #2  
Elite Member
iTrader: (11)
 
chicksdigmiatas's Avatar
 
Join Date: Apr 2008
Location: Texas, 'Murica
Posts: 2,497
Total Cats: 0
Default

Intake manifold gasket? You egr block isnt as good as you think? Are you 100% sure it isnt the injector seal? Master cylinder hose?
chicksdigmiatas is offline  
Old 07-05-2017, 09:59 AM
  #3  
Newb
Thread Starter
 
estephens13's Avatar
 
Join Date: Jan 2010
Location: Houston
Posts: 38
Total Cats: -2
Default

Originally Posted by chicksdigmiatas
Intake manifold gasket? You egr block isnt as good as you think? Are you 100% sure it isnt the injector seal? Master cylinder hose?
Thanks for the suggestions. It's definitely not the egr tube, or injector seals. The gasket is a possibility, but it sure seemed like a lot of air moving for a failed intake manifold gasket.
estephens13 is offline  
Old 07-06-2017, 12:51 AM
  #4  
Newb
 
rx7_guy's Avatar
 
Join Date: Apr 2016
Posts: 44
Total Cats: 0
Default

i built a tool out of pvc and rubber boots to pressurize system to find leaks.. works pretty well
rx7_guy is offline  
Old 07-06-2017, 10:38 AM
  #5  
Newb
Thread Starter
 
estephens13's Avatar
 
Join Date: Jan 2010
Location: Houston
Posts: 38
Total Cats: -2
Default

Originally Posted by rx7_guy
i built a tool out of pvc and rubber boots to pressurize system to find leaks.. works pretty well
I built a boost leak tester, just cant figure out exactly where the sound is coming from.
estephens13 is offline  
Old 07-06-2017, 11:55 AM
  #6  
Junior Member
 
sshamrockk's Avatar
 
Join Date: Oct 2016
Location: Western Mass.
Posts: 270
Total Cats: 20
Default

Originally Posted by estephens13
I built a boost leak tester, just cant figure out exactly where the sound is coming from.
If you got any friends that are straight vape nation, you could have them blow smoke into the intake and then pressurize it. Should see where it's coming out. Or use anything that produces a smoke/fog.
sshamrockk is offline  
Old 07-06-2017, 03:42 PM
  #7  
Senior Member
iTrader: (1)
 
Bronson M's Avatar
 
Join Date: Feb 2015
Posts: 1,104
Total Cats: 217
Default

How are you verifying all of the intake valves are closed?
Bronson M is offline  
Old 07-06-2017, 04:09 PM
  #8  
Newb
Thread Starter
 
estephens13's Avatar
 
Join Date: Jan 2010
Location: Houston
Posts: 38
Total Cats: -2
Default

Originally Posted by Bronson M
How are you verifying all of the intake valves are closed?
I can hear a big leak. Both valves would have to be open for that to be an issue anyway.
estephens13 is offline  
Old 07-07-2017, 11:01 AM
  #9  
Junior Member
iTrader: (1)
 
alsmedic's Avatar
 
Join Date: Aug 2015
Location: Lakeland Florida 33805
Posts: 78
Total Cats: 2
Default

Get a piece of hose, like vacuum hose, stick one end in your ear and probe with the other end to listen for the leak. You'll be able to hear exactly where the air is going.
alsmedic is offline  
Old 07-10-2017, 11:49 AM
  #10  
Newb
Thread Starter
 
estephens13's Avatar
 
Join Date: Jan 2010
Location: Houston
Posts: 38
Total Cats: -2
Default

Well, I ran a smoke test and smoke poured out of the body of the egr. I didn't have time to test further, but hopefully that's the only issue.
estephens13 is offline  
Old 07-10-2017, 11:52 AM
  #11  
Newb
 
rx7_guy's Avatar
 
Join Date: Apr 2016
Posts: 44
Total Cats: 0
Default

Originally Posted by estephens13
Well, I ran a smoke test and smoke poured out of the body of the egr. I didn't have time to test further, but hopefully that's the only issue.
nice... fixed that and run the smoke again ... make sure you dont have multiple areas.
rx7_guy is offline  




All times are GMT -4. The time now is 01:52 PM.