Could you identify this turbo?
#1
Could anyone tell me what this is, it's approximate value if any and or if its worth holding onto for future possible project?
Thank you
Can only post one at a time.
Another.
Last one.
Stumped you guys? Oh we'll, think we figured out. I'll try to sell it.
Thank you
Can only post one at a time.
Another.
Last one.
Stumped you guys? Oh we'll, think we figured out. I'll try to sell it.
Last edited by Braineack; 01-23-2013 at 08:24 AM.
#4
Boost Czar
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,508
Total Cats: 4,080
that doesnt look like a twin t25. that looks like if from the 300zx,a single t3 from the 87-89 or so single turbo 300zx...which would be a 60 trim t3 with a .63 a/r housing.
which would be a good turbo on a 1.8L miata.
which would be a good turbo on a 1.8L miata.
#6
Boost Czar
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,508
Total Cats: 4,080
ah yes, that's the T25.
someone fit one of those on a 1.6L miata before:
thread: https://www.miataturbo.net/diy-turbo...56/#post496908
someone fit one of those on a 1.6L miata before:
thread: https://www.miataturbo.net/diy-turbo...56/#post496908
#8
Boost Czar
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,508
Total Cats: 4,080
200rwtq at 3200K on a dynodynamics on a 1.6L isn't bad. that's roughly ~224rwtq on a dynojet.
I don't have a small turbo by any stretch, but I dont make 220rwtq until about 4K. I'm sure you get get better top end with better boost control (the thread suggested he had boost drop issues).
I'd run it on a street car.
I don't have a small turbo by any stretch, but I dont make 220rwtq until about 4K. I'm sure you get get better top end with better boost control (the thread suggested he had boost drop issues).
I'd run it on a street car.
#9
Yeah, that's no good. Thanks for posting that thread.
Low and mid range power would be great for autox but there plenty of times where I'm above 5000rpm. Anyway piecing together something is not something I am terribly interested in right now. I'm not knowledgeable yet in the art of FI.
I'll just see if anyone wants it.
Low and mid range power would be great for autox but there plenty of times where I'm above 5000rpm. Anyway piecing together something is not something I am terribly interested in right now. I'm not knowledgeable yet in the art of FI.
I'll just see if anyone wants it.
Thread
Thread Starter
Forum
Replies
Last Post