SKMetalworks

iTrader: (7)

I have a greddyd miata that i just started workin on after i went on a break for a year or so. Ive done a bunch of stuff to get her running again but its a long road that is bound to have some errors. Anyway the last time she was on, she was leakin from the oil feed/return area and i was trying to tighten the oil feed Male Male piece and i snapped it in two anyway i got the half that was in the turbo but now i have no way to feed my turbo precious oil. I ordered the fitting from AN Plumbing over a year ago and i dont know whats the correct size to order. Can somone help me?

cjernigan

iTrader: (13)

Is it not -3 or -4AN to 7/16 inverted flare? I don't know the greddy well enough to give more well educated information.

SKMetalworks

iTrader: (7)

Its a -4 AN and one ends chamfered. any easy way of checking what one i have? tape measure?

cjernigan

iTrader: (13)

One of the greddy guys on here will know. I almost guarantee Joe or Ben will know that fitting off the top of their head.

Braineack

iTrader: (62)

almost certain there's a useful saved posts section.....happens to have theses sorts of things....


but the answer should be: 10mm x 1.25