Does anyone know what nissan turbo is a "2560"
#1
Junior Member
Thread Starter
iTrader: (5)
Join Date: Nov 2010
Location: Maine
Posts: 400
Total Cats: -19
Does anyone know what nissan turbo is a "2560"
Does anyone know what nissan turbo is a "2560"? I find a ton of T25's T28's, T28R (2560R) but can't find out what nissan turbo number is a "2560" that is best for our cars.
Tahnks,
Drew
Tahnks,
Drew
#3
Garrett Part No. 466541-1
Nissan Part No. 14411-69F00
Garrett Part No. 466541-4
Nissan Part No. 14411-91F00
From Garrett's catalog for the GT2560R:
- Dual ball bearing, oil & water-cooled CHRA
- Internally wastegated turbine housing complete with actuator
- Turbine housing is cast from high-nickel “Ni-Resist” material (466541-4 only)
- Turbine wheel is cast from “Inconel” material for extreme applications (466541-4 only)
- OEM turbocharger on Nissan SR20DET engine
Nissan Part No. 14411-69F00
Garrett Part No. 466541-4
Nissan Part No. 14411-91F00
From Garrett's catalog for the GT2560R:
- Dual ball bearing, oil & water-cooled CHRA
- Internally wastegated turbine housing complete with actuator
- Turbine housing is cast from high-nickel “Ni-Resist” material (466541-4 only)
- Turbine wheel is cast from “Inconel” material for extreme applications (466541-4 only)
- OEM turbocharger on Nissan SR20DET engine
#6
Slowest Progress Ever
iTrader: (26)
Join Date: Oct 2007
Location: The coal ridden hills of Pennsylvania
Posts: 6,025
Total Cats: 304
All s13's used a 56mm compressor wheel which makes the turbo similar to the gt2554. This is the most common sr20 turbo.
The s14 used a 60mm compressor wheel and it was basically a journal bearing 2560.
The s14 used a 60mm compressor wheel and it was basically a journal bearing 2560.
#9
Slowest Progress Ever
iTrader: (26)
Join Date: Oct 2007
Location: The coal ridden hills of Pennsylvania
Posts: 6,025
Total Cats: 304
Conflict this:
Specifications for RED Top SR20DET
180SX 91-93 and Silvia 91-93
Displacement: 1998cc (2.0 liter)
Cam type: DOHC 16 valve, chain driven cam sprockets
Bore and stroke: 86mm x 86mm
Compression: 8.5 : 1
Horsepower: 205ps at 6000rpm
Torque: 203 ft/lbs at 4000rpm
Stock boost: 7 psi
Throttle body bore: 60mm
Injector size: 370cc/min
Turbo specs:
Compressor: T-25, 60 trim 56mm BCI-1 compressor.
Turbine: T-25, 62 trim 53.8mm 0.64 A/R turbine housing.
Center Section: Journal bearigs
Specifications for Black Top SR20DET
180SX 94-98
Displacement: 1998cc (2.0 liter)
Cam type: DOHC 16 valve, chain driven cam sprockets
Bore and stroke: 86mm x 86mm
Compression: 8.5 : 1
Horsepower: 205hp at 6000rpm
Torque: 203 ft/lbs at 4000rpm
Stock boost: 7 psi
Throttle body bore: 60mm
Injector size: 370cc/min
Turbo specs:
Compressor: T-25, 60 trim 56mm BCI-1 compressor.
Turbine: T-25, 62 trim 53.8mm 0.64 A/R turbine housing.
Center Section: Journal bearings
Specifications for Black Top S14 T28 VTC
Silvia 95-98
Horsepower: 220hp at 6000rpm
Torque: 203 ft/lbs at 4800rpm
Turbo specs:
Compressor: T-28, 60 trim 60 mm BCI-1 compressor in T-04B housing
Turbine: T-25, 62 trim 53.8mm 0.64 A/R turbine housing.
Center Section: Ball Bearing
Specifications S15 Black Top SR20DET
S15 Silvia 99-
Horsepower: 250ps at 6000rpm
Transmission: 6 Speed, Close Ratio
Injector size: 480cc/min
Turbo specs:
Compressor: T-28, 60 trim 60 mm BCI-1 compressor in T-04B housing
Turbine: Inconel turbine wheel. Cast divider wall between turbine discharge and wastegate.
Center Section: Ball Bearing
Specifications for RED Top SR20DET
180SX 91-93 and Silvia 91-93
Displacement: 1998cc (2.0 liter)
Cam type: DOHC 16 valve, chain driven cam sprockets
Bore and stroke: 86mm x 86mm
Compression: 8.5 : 1
Horsepower: 205ps at 6000rpm
Torque: 203 ft/lbs at 4000rpm
Stock boost: 7 psi
Throttle body bore: 60mm
Injector size: 370cc/min
Turbo specs:
Compressor: T-25, 60 trim 56mm BCI-1 compressor.
Turbine: T-25, 62 trim 53.8mm 0.64 A/R turbine housing.
Center Section: Journal bearigs
Specifications for Black Top SR20DET
180SX 94-98
Displacement: 1998cc (2.0 liter)
Cam type: DOHC 16 valve, chain driven cam sprockets
Bore and stroke: 86mm x 86mm
Compression: 8.5 : 1
Horsepower: 205hp at 6000rpm
Torque: 203 ft/lbs at 4000rpm
Stock boost: 7 psi
Throttle body bore: 60mm
Injector size: 370cc/min
Turbo specs:
Compressor: T-25, 60 trim 56mm BCI-1 compressor.
Turbine: T-25, 62 trim 53.8mm 0.64 A/R turbine housing.
Center Section: Journal bearings
Specifications for Black Top S14 T28 VTC
Silvia 95-98
Horsepower: 220hp at 6000rpm
Torque: 203 ft/lbs at 4800rpm
Turbo specs:
Compressor: T-28, 60 trim 60 mm BCI-1 compressor in T-04B housing
Turbine: T-25, 62 trim 53.8mm 0.64 A/R turbine housing.
Center Section: Ball Bearing
Specifications S15 Black Top SR20DET
S15 Silvia 99-
Horsepower: 250ps at 6000rpm
Transmission: 6 Speed, Close Ratio
Injector size: 480cc/min
Turbo specs:
Compressor: T-28, 60 trim 60 mm BCI-1 compressor in T-04B housing
Turbine: Inconel turbine wheel. Cast divider wall between turbine discharge and wastegate.
Center Section: Ball Bearing
#12
Elite Member
iTrader: (13)
Join Date: Dec 2006
Location: Taos, New mexico
Posts: 6,613
Total Cats: 567
Guys, this is simple.
S13 red/blacktop turbo: Small t25, journal bearing, a 2554 basically.
s14 notchback turbo: bigger t25, journal bearing, a 2560 basically.
s15 vvt turbo: bigger t25, BALL BEARING, same size as s14 turbo - 2560 basically.
So you want a BB 2560? Find a s15 turbo. I THINK (not sure though) some of the late s14 motors also had these, but still rare.
Edit: just read thirdgens post above. Looks like the s14 "silvia" was ball bearing as well? I do know the ball bearing versions are the rarest, but i've seen them for around 350 bucks a few times now. This is what I'm getting for my new build..
S13 red/blacktop turbo: Small t25, journal bearing, a 2554 basically.
s14 notchback turbo: bigger t25, journal bearing, a 2560 basically.
s15 vvt turbo: bigger t25, BALL BEARING, same size as s14 turbo - 2560 basically.
So you want a BB 2560? Find a s15 turbo. I THINK (not sure though) some of the late s14 motors also had these, but still rare.
Edit: just read thirdgens post above. Looks like the s14 "silvia" was ball bearing as well? I do know the ball bearing versions are the rarest, but i've seen them for around 350 bucks a few times now. This is what I'm getting for my new build..
Thread
Thread Starter
Forum
Replies
Last Post