Need the XEDE Timing Pattern File
#1
Junior Member
Thread Starter
iTrader: (2)
Join Date: Sep 2009
Location: Chicago, IL
Posts: 248
Total Cats: 0
Need the XEDE Timing Pattern File
Anyone have this thing? I sent an email to bell engineering but I'm curious if anyone has the pattern file laying around they could email to me. Standard 99-00 NB XEDE, have my map but apparently don't have the pattern file. :(
Thanks in advance.
Thanks in advance.
#2
Junior Member
Thread Starter
iTrader: (2)
Join Date: Sep 2009
Location: Chicago, IL
Posts: 248
Total Cats: 0
Alright for anyone who searches for this in the future I'm going to upload the XEDE data I have in case they can't find it anywhere else.
NB Timing signal (this file will work on any non-MSM NB)
http://www.mediafire.com/?5brorcdi1liqyyb
Stock Injector basemap for XEDE for NB, used for initial testing, stock injectors cannot supply enough fuel for any reasonable amount of boost.
http://www.mediafire.com/?412h4hhs9c0hjsw
If you move up injector sizes, you can use the above map as a baseline by changing the first scaling value in your XEDE (read the XEDE pdf to see how to do this). My Deatsch Werks 440cc Injectors need a scaling value changed from 1.0 (stock injectors) to .943 (440cc's).
440cc, MSM turbo, 10psi map. Tuned to ~12:1AFR. Will work fine as a base map on wastegate pressure.
http://www.mediafire.com/?bqowbmi5qjwebf2
NB Timing signal (this file will work on any non-MSM NB)
http://www.mediafire.com/?5brorcdi1liqyyb
Stock Injector basemap for XEDE for NB, used for initial testing, stock injectors cannot supply enough fuel for any reasonable amount of boost.
http://www.mediafire.com/?412h4hhs9c0hjsw
If you move up injector sizes, you can use the above map as a baseline by changing the first scaling value in your XEDE (read the XEDE pdf to see how to do this). My Deatsch Werks 440cc Injectors need a scaling value changed from 1.0 (stock injectors) to .943 (440cc's).
440cc, MSM turbo, 10psi map. Tuned to ~12:1AFR. Will work fine as a base map on wastegate pressure.
http://www.mediafire.com/?bqowbmi5qjwebf2
Last edited by saedrin; 09-01-2010 at 03:20 PM.
#4
Junior Member
Thread Starter
iTrader: (2)
Join Date: Sep 2009
Location: Chicago, IL
Posts: 248
Total Cats: 0
Apparently I can no longer edit my posts, so I must bump this.
440cc, MSM turbo, 10psi, revised map. Should increase highway MPG (~14.7 AFR at cruise) and runs a bit richer under boost (under 12:1 AFR everywhere during load).
http://www.mediafire.com/file/r3m9wp...psi%20MAP2.X32
440cc, MSM turbo, 10psi, revised map. Should increase highway MPG (~14.7 AFR at cruise) and runs a bit richer under boost (under 12:1 AFR everywhere during load).
http://www.mediafire.com/file/r3m9wp...psi%20MAP2.X32
Thread
Thread Starter
Forum
Replies
Last Post
Frank_and_Beans
Supercharger Discussion
13
09-12-2016 08:17 PM