2001 NB cams...
#13
You are right about that. Wedcam does not show vvt cams available. My bad.
I assume you contacted Integral Cam? I here Integral has a quality product, but I have never done business with them. My next camshaft will come from them. They show 2002 and later camshafts available on their site.
I assume you contacted Integral Cam? I here Integral has a quality product, but I have never done business with them. My next camshaft will come from them. They show 2002 and later camshafts available on their site.
#14
Junior Member
Thread Starter
Join Date: Jan 2010
Location: Always Bigger in Texas
Posts: 57
Total Cats: 0
Ya, I called integral a few days ago and they redirected me to someone else who gave me the same answers. "no cams for the vvt miata". I could send mine in to be redone for the price of new billets... **** THAT.
#15
Do not be too apprehensive of sending in your cams or a spare set to be redone. All good cam manufacturers are capable of the procedure.
If a billet is not available for a particular cam, the cam manufacturer will reweld material back to your cam and then regrind to make higher lift and more duration. It adds some work on their end, so it is a task that is often more expensive than new cams. If they do it correctly, they can maintain the base circle which makes setting up the valvetrain less of a hassle.
If a billet is not available for a particular cam, the cam manufacturer will reweld material back to your cam and then regrind to make higher lift and more duration. It adds some work on their end, so it is a task that is often more expensive than new cams. If they do it correctly, they can maintain the base circle which makes setting up the valvetrain less of a hassle.
#16
Integral makes VVT cams... they're listed on their website you fail
1.8 Mechanical Lifter Cam Profiles, 2002-2005 engines with variable intake valve timing
Profile Seat Duration .050" Duration Cam Lift
Stock (intake/exhaust) 242° / 244° 207.9° / 210.4° .370"/.350" (9.40 mm/8.89 mm)
Stage 1 (intake/exhaust) 252° / 254° 213.8° / 215.7° .373"/.365" (9.47 mm/9.27 mm)
Picture of VVT cam on left
.
1.8 Mechanical Lifter Cam Profiles, 2002-2005 engines with variable intake valve timing
Profile Seat Duration .050" Duration Cam Lift
Stock (intake/exhaust) 242° / 244° 207.9° / 210.4° .370"/.350" (9.40 mm/8.89 mm)
Stage 1 (intake/exhaust) 252° / 254° 213.8° / 215.7° .373"/.365" (9.47 mm/9.27 mm)
Picture of VVT cam on left
.
#17
Junior Member
Thread Starter
Join Date: Jan 2010
Location: Always Bigger in Texas
Posts: 57
Total Cats: 0
Integral makes VVT cams... they're listed on their website you fail
1.8 Mechanical Lifter Cam Profiles, 2002-2005 engines with variable intake valve timing
Profile Seat Duration .050" Duration Cam Lift
Stock (intake/exhaust) 242° / 244° 207.9° / 210.4° .370"/.350" (9.40 mm/8.89 mm)
Stage 1 (intake/exhaust) 252° / 254° 213.8° / 215.7° .373"/.365" (9.47 mm/9.27 mm)
Picture of VVT cam on left
.
1.8 Mechanical Lifter Cam Profiles, 2002-2005 engines with variable intake valve timing
Profile Seat Duration .050" Duration Cam Lift
Stock (intake/exhaust) 242° / 244° 207.9° / 210.4° .370"/.350" (9.40 mm/8.89 mm)
Stage 1 (intake/exhaust) 252° / 254° 213.8° / 215.7° .373"/.365" (9.47 mm/9.27 mm)
Picture of VVT cam on left
.
well sure, Ive seen all these but I have a 2001 bro....
I do appreciate it but the listing is for 2002-2005... difference?? you seem to know. I had called them and they didnt seem to have anything for me by what they said.
#20
Get with the program...son.
Yeah, you might think I'm being an *******....but also remember that I am giving you the correct information.