Chinese connecting rods
#1
Junior Member
Thread Starter
Join Date: Mar 2011
Location: Eindhoven, The netherlands
Posts: 197
Total Cats: 19
Chinese connecting rods
Does any one have experience with these, the picture and drawing are an example.
H Beam Connecting Rods for Mazda Miata 323 GTX Ford Escort high quality fits 3/8'' bolt-in Crank Mechanism from Automobiles & Motorcycles on Aliexpress.com
I asked the seller and he gave me this info
I know i should not save on connecting rods, but i strongly believe these are the same as the ones sold everywhere else but with a name on it. There only 200 dollars with free shipping instead of the 500-600 dollar ones
Our H Beam connecting rods features
4340 (40CrNiMoA) Aircraft quality steel
CNC machined all of surfaces
Shot Peened to relieve stress
Magnafluxed, X-rayed and Sonic tested to insure quality
Heat treated HRC35-40
Weight matched sets+-1.5grams
4340 (40CrNiMoA) Aircraft quality steel
CNC machined all of surfaces
Shot Peened to relieve stress
Magnafluxed, X-rayed and Sonic tested to insure quality
Heat treated HRC35-40
Weight matched sets+-1.5grams
I asked the seller and he gave me this info
hello, dear friend, it is about 440g per piece.
the products are unbranded, but it is with quality warranty.
our products have been exported to USA , UK, France, Germany
and many other countries,
of course also Netherlands
all of our customers like our quality.
our products could support 800 to 1000 horse power (hp) if you use strong bolts for them.
all of our products are with quality warranty.
best regards
Simon
the products are unbranded, but it is with quality warranty.
our products have been exported to USA , UK, France, Germany
and many other countries,
of course also Netherlands
all of our customers like our quality.
our products could support 800 to 1000 horse power (hp) if you use strong bolts for them.
all of our products are with quality warranty.
best regards
Simon
132.79mm are using 3/8" bolts size bore, it is about 520g, but it is more stronger than 5/16" bolts sizes connecting rods
right now,
133mm with 5/16" bolts bore ones is not in stock,
but 132.79mm with 3/8" bolts bore are in stock.
right now,
133mm with 5/16" bolts bore ones is not in stock,
but 132.79mm with 3/8" bolts bore are in stock.
#3
mkturbo.com
iTrader: (24)
Join Date: May 2006
Location: Charleston SC
Posts: 15,177
Total Cats: 1,681
Those are the same chinese rods that most of us are running, the one reason his are slightly cheaper is because they do not come with the ARP2000 rod bolts. I bet after you purchase those, then the ARP bolts, your total cost will be about the same as all the other ebay vendors who sell with the ARP bolts already.
#5
Junior Member
Thread Starter
Join Date: Mar 2011
Location: Eindhoven, The netherlands
Posts: 197
Total Cats: 19
Well overhere in europe they are very expensive, same as every car part.
Cheapest i could find was 400,- euro with arp. And a brand i never heard of. Thats around 600 dollar i guess
Eagle or k1 are around 600,- euro.
These chinese are 150,- and arp are around 100,-
Cheapest i could find was 400,- euro with arp. And a brand i never heard of. Thats around 600 dollar i guess
Eagle or k1 are around 600,- euro.
These chinese are 150,- and arp are around 100,-
#7
Junior Member
Thread Starter
Join Date: Mar 2011
Location: Eindhoven, The netherlands
Posts: 197
Total Cats: 19
Yes but due to high shipping cost and high import cost its more cost effective to import from china
Shipping from ebay(us particular) ranges between 60-100 dollars excl import charges
Import charges are over the total price incl shipping
Shipping from ebay(us particular) ranges between 60-100 dollars excl import charges
Import charges are over the total price incl shipping
Thread
Thread Starter
Forum
Replies
Last Post
stoves
Suspension, Brakes, Drivetrain
5
04-21-2016 03:00 PM