engine assembly tips
#1
Junior Member
Thread Starter
iTrader: (1)
Join Date: Aug 2008
Location: Evansville, Indiana
Posts: 314
Total Cats: 0
engine assembly tips
i'm in the process of putting together a 1.8 for my 93. i bought a motor and sent it to the machine shop to be freshened up and have new rods and pistons installed.
i'm going to be bolting the head on soon. as well as the oil and water pump, oil pick up, mbsp.... you get the idea. the motor has been sitting in the garage apart for about six months while i was collecting parts.
is there anything i need to do that might not be obvious to a complete newb such as myself?
i'm going to be bolting the head on soon. as well as the oil and water pump, oil pick up, mbsp.... you get the idea. the motor has been sitting in the garage apart for about six months while i was collecting parts.
is there anything i need to do that might not be obvious to a complete newb such as myself?
#4
There are many small, yet very important, things it leaves out like deburring the corners of the rings after gapping them. These are things that most manuals leave out that are absolutely necessary. The best recommendation I can give is to scoure the web looking for picture guides with description of various motor builds of any kind to pick up as many pointers as you can. Read until you can imagine yourself going through the process in your head.
The most important thing in putting together a motor is the phrase "cleanliness is next to godliness"
#6
Elite Member
iTrader: (1)
Join Date: Feb 2008
Location: Birmingham Alabama
Posts: 7,930
Total Cats: 45
I also learned rebuilding Honda engines. I still wouldn't call myself a pro, but my 1.8 is still running like a champ after 10k miles. I built it ghetto style in my back yard and in my house, no real professional tools. Then again it also took me several months to figure out my rings were shot and it wasn't my head gasket. It was probably the 5th or 6th engine I have built, so I should have known better. I say go for it. If you mess it up, too bad, just try again.
#8
Junior Member
Thread Starter
iTrader: (1)
Join Date: Aug 2008
Location: Evansville, Indiana
Posts: 314
Total Cats: 0
my main concern is that the parts are dirty from sitting in the garage for months.
#9
Cpt. Slow
iTrader: (25)
Join Date: Oct 2005
Location: Oregon City, OR
Posts: 14,224
Total Cats: 1,145
Well with the rings in the pistons and the pistons in the block, and the connecting rods all bolted up, yes, the really hard part is out of the way. But there's still a lot to **** up. You now need to seal the oil pan, oil pump, water pump, and rear main seal. ******* up any of those requires you to pull the engine out again, keep that in mind.
#13
Tour de Franzia
iTrader: (6)
Join Date: Jun 2006
Location: Republic of Dallas
Posts: 29,085
Total Cats: 375
busted. You got me!!! I payed someone to use precision equipment to build my engine that sees 7000rpm more per session than your shitbox sees in its life. The holiday season is approaching quickly; I recommend that you STFU before I make a Yarmulke out of your flesh.
#16
Junior Member
Thread Starter
iTrader: (1)
Join Date: Aug 2008
Location: Evansville, Indiana
Posts: 314
Total Cats: 0
How can I make sure I have it on correctly? Will taking a good look at the block and making sure none of the oil passages are blocked tell me?
#17
Elite Member
iTrader: (2)
Join Date: May 2007
Location: Cromwell, Connecticut
Posts: 2,605
Total Cats: 16
yeah double and tripple check that none of the passages are blocked and everything fits correctly. I just rebuilt my motor and i am a little confused because I am getting white smoke on cold start up and occasionally on decell... I only have 50 miles on it and i havent been driving it (oil pan leak issue ) so i cant really tell anything yet but i hope my head gasket is fine.
#18
Well, I wouldn't quite say that I built the motor.... but I did put it back together. Got a used block, and a head from a buddy. Assembly included putting all the stuff from the original motor, the head gasket, etc.....
Its been working fine for 50K kms now....
One thing to consider.... swap all the PITA stuff when you do put the motor in. Do all the coolant hoses, etc.... Trust me.... also make sure when you put your clamps and stuff on so you can get them off again with the car in the way.
Also you can have the old one as a reference for things like the head gasket.....
Dave,
Its been working fine for 50K kms now....
One thing to consider.... swap all the PITA stuff when you do put the motor in. Do all the coolant hoses, etc.... Trust me.... also make sure when you put your clamps and stuff on so you can get them off again with the car in the way.
Also you can have the old one as a reference for things like the head gasket.....
Dave,