VVT and NA oil pressure sender
#1
Senior Member
Thread Starter
iTrader: (1)
Join Date: Dec 2007
Location: San Jose
Posts: 658
Total Cats: 340
VVT and NA oil pressure sender
Are any of you VVT-swap folks running the big fat NA real oil pressure sender?
My VVT motor is still on the stand and I'm realizing that because the sender is now on the VVT feed line, it's significantly lower on the block than it was originally and it's going to hit at least the starter bracket, if not the filter.
What have the rest of you done? Grind away the bracket? Remote mount? (if so, where?) I found the steel BSP->AN->BSP bits I'd need at Pegasus, but if you've got a better solution I'd love to hear it.
My VVT motor is still on the stand and I'm realizing that because the sender is now on the VVT feed line, it's significantly lower on the block than it was originally and it's going to hit at least the starter bracket, if not the filter.
What have the rest of you done? Grind away the bracket? Remote mount? (if so, where?) I found the steel BSP->AN->BSP bits I'd need at Pegasus, but if you've got a better solution I'd love to hear it.
#8
Elite Member
iTrader: (1)
Join Date: Jun 2006
Location: Warrington/Birmingham
Posts: 2,642
Total Cats: 42
Well I used the NA starter as that's what I had.Additionally I didn't want to be hunting a random buzzing noise that occurred because I didn't refit a stock bracket, BTDT and it's not fun
Thread
Thread Starter
Forum
Replies
Last Post
Zaphod
MEGAsquirt
47
10-26-2018 11:00 PM
stoves
Suspension, Brakes, Drivetrain
5
04-21-2016 03:00 PM
JesseTheNoob
DIY Turbo Discussion
15
09-30-2015 02:44 PM