FM3 manifold and downpipe + Enthuza test pipe
#1
Antisaint
Thread Starter
iTrader: (17)
Join Date: Feb 2007
Location: Danbury, CT
Posts: 4,564
Total Cats: 58
FM3 manifold and downpipe + Enthuza test pipe
Going to be selling my FM3 manifold and downpipe that are currently on the car. I should have them off and ready to ship within 2 weeks (once I have my new parts). The manifold had cracks but I had them welded. I would recommend that whoever buys it has it resurfaced for a nice fit.
Looking to get $250 for the manifold.
The downpipe is just as it was when I put it in. I painted it with high temp flat black and wrapped most of it with exhaust wrap. Everything is holding up really well.
Looking to get $350 for the downpipe.
I also might be selling the test pipe as well. Jason at Enthuza made this for me. It has a bung for my LC1 in it. Has a 2.5" inlet and 3" out.
Looking to get $70 for the test pipe. Basically brand new.
All prices are not including shipping. Send me a PM for a shipping quote.
If your interested in all 3 of the above I'll do it for $650 + shipping.
And the Tial wastegate might be up for sale too. It needs work, like a rebuild. Its 38mm. If your interested in it shoot me a offer via PM. Otherwise I'm going to clean it up and use it as a paperweight.
Pictures of the parts below. Lots more to see in my build thread link in my sig as well.
Any questions or requests for more pictures just ask. Thanks.
Looking to get $250 for the manifold.
The downpipe is just as it was when I put it in. I painted it with high temp flat black and wrapped most of it with exhaust wrap. Everything is holding up really well.
Looking to get $350 for the downpipe.
I also might be selling the test pipe as well. Jason at Enthuza made this for me. It has a bung for my LC1 in it. Has a 2.5" inlet and 3" out.
Looking to get $70 for the test pipe. Basically brand new.
All prices are not including shipping. Send me a PM for a shipping quote.
If your interested in all 3 of the above I'll do it for $650 + shipping.
And the Tial wastegate might be up for sale too. It needs work, like a rebuild. Its 38mm. If your interested in it shoot me a offer via PM. Otherwise I'm going to clean it up and use it as a paperweight.
Pictures of the parts below. Lots more to see in my build thread link in my sig as well.
Any questions or requests for more pictures just ask. Thanks.
#9
#13
Antisaint
Thread Starter
iTrader: (17)
Join Date: Feb 2007
Location: Danbury, CT
Posts: 4,564
Total Cats: 58
I wanted to bump this thread and add pictures of the Tial wastegate.
I will do the manifold and downpipe shipped for $600. And I'll throw in the Tial wg for free! The mani/dp are still on the car, but I will take them off tomorrow if someone wants them.
Taking some better pictures of the testpipe now, they will be up shortly.
I will do the manifold and downpipe shipped for $600. And I'll throw in the Tial wg for free! The mani/dp are still on the car, but I will take them off tomorrow if someone wants them.
Taking some better pictures of the testpipe now, they will be up shortly.
#14
Antisaint
Thread Starter
iTrader: (17)
Join Date: Feb 2007
Location: Danbury, CT
Posts: 4,564
Total Cats: 58
Testpipe is made by Jason @ Enthuza and has roughly....100-200 miles on it.
I wanted to clarify on the size as well. Its actually a 2.25" inlet and a 2.5" outlet.
Looking for $70 + shipping.
If you are interested in the mani/dp and the testpipe, I'll do it all for $650 shipped!
I found some other odds and ends I have, but I will post those up in a different for sale thread.
I wanted to clarify on the size as well. Its actually a 2.25" inlet and a 2.5" outlet.
Looking for $70 + shipping.
If you are interested in the mani/dp and the testpipe, I'll do it all for $650 shipped!
I found some other odds and ends I have, but I will post those up in a different for sale thread.
#17
Ok ------s, why in the **** has thing not sold yet?!?!?!
This is a t2 flanged manifold with an external wastegate and matching downpipe...for 600 bucks!
Plus Vash has dyno runs, videos of this setup running and proving it makes great power. The FM3 was desinged to make big power and that is what it does!!!
This is a t2 flanged manifold with an external wastegate and matching downpipe...for 600 bucks!
Plus Vash has dyno runs, videos of this setup running and proving it makes great power. The FM3 was desinged to make big power and that is what it does!!!
#18
Antisaint
Thread Starter
iTrader: (17)
Join Date: Feb 2007
Location: Danbury, CT
Posts: 4,564
Total Cats: 58
If anyone is interested in trades as well let me know! There's some things I need that I would be willing to trade for these parts. I don't NEED the cash, but would prefer it. My buddies just went boarding yesterday and I missed out. I need to get some new gear and setup seeing that I havent gone in.......ohh.....3-4 years! And the fact that my Burton special is drilled into the wall doesn't help.
But seriously, I would be willing to trade for some bigger brake parts, engine or head parts, etc etc.
I really don't want to eBay this stuff, so even though I hardly ever visit CR or M.net, I think I will post up ads there as well.
But seriously, I would be willing to trade for some bigger brake parts, engine or head parts, etc etc.
I really don't want to eBay this stuff, so even though I hardly ever visit CR or M.net, I think I will post up ads there as well.
#19
What parts are still up for sale here?
#20
Antisaint
Thread Starter
iTrader: (17)
Join Date: Feb 2007
Location: Danbury, CT
Posts: 4,564
Total Cats: 58
Test pipe is sold.
The FM3 manifold and down pipe are still for sale, and I still have the Tial wastegate.
For the manifold, down pipe, and wastegate, its $600 shipped! New parts are here now, so I will definitely be pulling these this week.
The FM3 manifold and down pipe are still for sale, and I still have the Tial wastegate.
For the manifold, down pipe, and wastegate, its $600 shipped! New parts are here now, so I will definitely be pulling these this week.