Bov?
#41
I just got one like this today, http://cgi.ebay.com/ebaymotors/BLOW-...13014931QQrdZ1
It works and fit right where I had the Bosch, But the spring is to strong for my low greddy PSI's
I got tired of paying $10 for the Lowes check valves. (I am on my 3rd one) But so far they worked better.
It works and fit right where I had the Bosch, But the spring is to strong for my low greddy PSI's
I got tired of paying $10 for the Lowes check valves. (I am on my 3rd one) But so far they worked better.
#43
I have the same forge blow-off valve as here http://www.forgemotorsport.com/conte...roduct=FMDV004
cant wait to use it it sounds awesome.
cant wait to use it it sounds awesome.
#44
I have the same forge blow-off valve as here http://www.forgemotorsport.com/conte...roduct=FMDV004
cant wait to use it it sounds awesome.
cant wait to use it it sounds awesome.
If you are still MAF and have stumbling problems let me know, I can send you a stiffer secondary spring.
#46
Yellow 15-23
Blue 23-30
Red 30+
Often times its hard to tell the green and yellow apart...
The numbers are approximate but usually work out pretty well. You want to use the softest spring possible but if you go to soft its possible for the valve to open partially due to latency and pressure drop. Eventually it will usually close but your spool can really take a hit.
Did you buy the valve from us? If it isn't one of ours don't go by colour for the springs measure the coil thickness and go from there.
#47
I recently replaced my FM valve with one of these:
http://cgi.ebay.com/ebaymotors/TYPE-...QQcmdZViewItem
http://cgi.ebay.com/ebaymotors/TYPE-...QQcmdZViewItem
It took me a few weeks but I found a decent deal on the EVO forums for a used RS unit
#57
I got this one,http://www.forgemotorsport.com/conte...oduct=FMDV004A, but in a 34mm variant. If you want the price, pm PAT! and work with him. I love the sound and will be recommending this valve for all of my friends cars. It also reacts super quick to any pressure transients. Also because of the dual piston, I see very little change in the AFR's when shifting or letting off the gas.
#59
Supporting Vendor
iTrader: (33)
Join Date: Jul 2006
Location: atlanta-ish
Posts: 12,659
Total Cats: 134
I got this one,http://www.forgemotorsport.com/conte...oduct=FMDV004A, but in a 34mm variant. If you want the price, pm PAT! and work with him. I love the sound and will be recommending this valve for all of my friends cars. It also reacts super quick to any pressure transients. Also because of the dual piston, I see very little change in the AFR's when shifting or letting off the gas.
#60
I will try and get one tommorrow or the next day and give you guys a link. It is just real nice and smooth sounding. Granted, it is a lot louder even at lower boost than what I would have thought. At 1psig, I can hear it pretty well. I will try and get some multiple levels to give you an idea.