Braided lines for turbo question
#1
Senior Member
Thread Starter
iTrader: (3)
Join Date: Jul 2008
Location: Minneapolis, MN
Posts: 963
Total Cats: -1
Braided lines for turbo question
I think its time for me to switch to braided lines for oil supply and drain at least. Right now I have a setup that comes with Begi-s kit. So all hoses are rubber. Is there any easy kit for drain and supply that is braided? I guess my question is what connectors i should i get? The drain on both ends is set up for rubber hoses so i know i will have to get a different connector that screws into the oil pan, but i have no idea what kind and where to get it. Same goes for the turbo side.
For the supply it should be easier because right now its got a screw on 90% elbows that stick into the hoses.
Any links or suggestions would be helpful. Maybe pics of your set up would help too.
I have a begi-s kit with gt2554 turbo.
For the supply it should be easier because right now its got a screw on 90% elbows that stick into the hoses.
Any links or suggestions would be helpful. Maybe pics of your set up would help too.
I have a begi-s kit with gt2554 turbo.
#3
We offer two easy kits for those parts too.
Oil supply line kit is here:
http://www.bellengineering.net/produ...roducts_id=448
If you do not need the oil inlet fitting for the turbo, we can always remove it and knock down the price.
Same thing for the oil drain line kit. Since you already have the flange, we could send everything else.
http://www.bellengineering.net/produ...products_id=82
Stephanie
Oil supply line kit is here:
http://www.bellengineering.net/produ...roducts_id=448
If you do not need the oil inlet fitting for the turbo, we can always remove it and knock down the price.
Same thing for the oil drain line kit. Since you already have the flange, we could send everything else.
http://www.bellengineering.net/produ...products_id=82
Stephanie
#4
Senior Member
Thread Starter
iTrader: (3)
Join Date: Jul 2008
Location: Minneapolis, MN
Posts: 963
Total Cats: -1
We offer two easy kits for those parts too.
Oil supply line kit is here:
http://www.bellengineering.net/produ...roducts_id=448
If you do not need the oil inlet fitting for the turbo, we can always remove it and knock down the price.
Same thing for the oil drain line kit. Since you already have the flange, we could send everything else.
http://www.bellengineering.net/produ...products_id=82
Stephanie
Oil supply line kit is here:
http://www.bellengineering.net/produ...roducts_id=448
If you do not need the oil inlet fitting for the turbo, we can always remove it and knock down the price.
Same thing for the oil drain line kit. Since you already have the flange, we could send everything else.
http://www.bellengineering.net/produ...products_id=82
Stephanie
Thread
Thread Starter
Forum
Replies
Last Post