jeff_man

iTrader: (7)

so before i order i want to make sure i have all the right parts, can i get a ya or na?

x1 Mocal Sandwich Plate- 20mm Thread

x4 Mocal 1/2" BSP x -10 fitting

x4ft -10 Aeroquip Stainless Steel Braided Hose

x2 -10 Aeroquip 90 Degree Reusable Elbow Fitting

x2 -10 Aeroquip Straight Reusable Swivel Fitting

not sure which cooler to get

http://www.racerpartswholesale.com/category/Oil_Coolers

curly

iTrader: (25)

Go as big as you can if you're racing, go with one of the smallers if you're streeting it. Although in Texas bigger might be fine on the streets. I'd figure out where and how you're going to mount it before you buy the two oil cooler fittings and the oil cooler itself. I'm using 90's on both ends.

hustler

iTrader: (6)

You should come over and look at my 3-different oil cooler set-ups.

VAmazda

Get a stacked fin type with bypass feature. Basically they stack a bunch of identical sections except the first is a bit less restrictive so cold oil can flow through with less work until it all warms up and starts venturing deeper and deeper into the cooler.

Or just get a thermostat.

jeff_man

iTrader: (7)

i ordered all the above with

Earl's 16 Row Oil Cooler -10 AN

VAmazda

ooo that one is nice!

jeff_man

iTrader: (7)

so all said and done it's costing me $303 with a better cooler and better flowing lines the FM kit.

aznDragonX

iTrader: (5)

so where are you going to mount that oil cooler?

jeff_man

iTrader: (7)

some where with 2.5 brake duct hose i have left over feeding to it. once i get the cooler in i will start looking at mounting locations

Faeflora

iTrader: (2)

Hi Jeff, thanks for posting your parts list. I'm picking up an earl's cooler from amazon too.

Where did you end up mounting your cooler? We both have an NB so I am very interested in your solution.