Stephanie Turner

So we've been trouble shooting a bog on a car for two weeks. We replaced O2 sensor, plugs, and wires. We checked the Crank angle sensor, CAS wires, and EGR to no avail. We were starting to take everything off the car to do a thorough check. Larry is taking the compressor inlet tube off when he sees something move inside the air filter. Further investigation reveals a two inch piece of rubber that had been flopping around inside the air filter. It looks like something that did not come off when they were making the air filter. So I am thinking someone at K & N is gonna get hurt.

Who would have ever thought something is stuck in the air filter? This stupid piece of rubber would make the car stall, fall flat on it's face under boost, and not start. Here I am thinking that the people that just replaced the transmission screwed something up and we're gonna have to pull the transmission too. (and with good reason, they lost the turbo support brace, downpipe cross bolt, and moved heat shields where they don't belong.) But NO, it's this stupid piece of rubber. My e-mail to the owner of the car went something like "you're not gonna believe this, but..."
Stephanie

Braineack

iTrader: (62)

whoops....

Splitime

iTrader: (24)

At least it stayed in the filter... and didn't head into the compressor wheel.

TurboTim

iTrader: (9)

I think that's meant to be there.

furian777

well, theres your problem, there was a shark in it.

lordrigamus

iTrader: (14)

That's odd, rubbers are supposed to keep you out of trouble, not cause it. I guess if it breaks, it could!

Sorry, my inner 13 year old said that, not me!

RotorNutFD3S

iTrader: (33)

The last two responses:

IcantDo55

iTrader: (11)

Its a restrictor plate.

m2cupcar

iTrader: (5)

I suppose that's why there's a fishin' pole up top?