what road should i take?
#1
Elite Member
Thread Starter
iTrader: (17)
Join Date: Apr 2009
Location: Atlanta, GA
Posts: 2,799
Total Cats: 1
what road should i take?
i have had so many thoughts as to what i can and want to do to my car.
here is a list of what the car is going to comprised of.
GT2860rs and all the Tial goodies to go with it
ARTech mani and DP, possibly full exhaust
6 speed
rebuilt OEM engine, and freshened cylinder head
bilstines and H&R springs
OEM sways
M1 HD DD RB
corbeau seat with slider
AEM WB, boost/vac guage
Cspence heat extractors
Tuckin 99 replica flares
16x8 0et wheels
there is a bunch of other **** that i havnt listed that i cant think of
what are some of the users here been wanting to see done to a car within reason? i think im gonna become the Ginny pig for alot of you
so what are some things i should do and what are some things that you would do?
here is the link to my build thread: https://www.miataturbo.net/showthrea...ght=95+package
here is a list of what the car is going to comprised of.
GT2860rs and all the Tial goodies to go with it
ARTech mani and DP, possibly full exhaust
6 speed
rebuilt OEM engine, and freshened cylinder head
bilstines and H&R springs
OEM sways
M1 HD DD RB
corbeau seat with slider
AEM WB, boost/vac guage
Cspence heat extractors
Tuckin 99 replica flares
16x8 0et wheels
there is a bunch of other **** that i havnt listed that i cant think of
what are some of the users here been wanting to see done to a car within reason? i think im gonna become the Ginny pig for alot of you
so what are some things i should do and what are some things that you would do?
here is the link to my build thread: https://www.miataturbo.net/showthrea...ght=95+package
#6
Elite Member
Thread Starter
iTrader: (17)
Join Date: Apr 2009
Location: Atlanta, GA
Posts: 2,799
Total Cats: 1
i have been tossin that one around! i want to build an engine for the fact that i want to hit over 350 RWHP. but at the same time it would be cheaper to keep a factory engine cause if i blow it just grab another good engine and throw it in V.S. paying to have another engine built.
i shouldnt be a ***** and just go for it..........
i made this thread after i took my sleep meds
i already have an engine being built, but its a OEM blueprinted and balanced build. once i have that in the car, i will find a good 1.8 short block and get it forged up.
i shouldnt be a ***** and just go for it..........
i already have an engine being built, but its a OEM blueprinted and balanced build. once i have that in the car, i will find a good 1.8 short block and get it forged up.
#7
Don't get Corbeau seats. Mine lasted less then a year before they were ripping, and after 16 months they had faded really bad. The sliding mounting brackets also mounted the seats too far away from the transmission tunnel, so the door hit the seats and the tonneau cover bolts on the side. I paid $1200 for the set, and in 3 years sold them for $100....
#8
Elite Member
Thread Starter
iTrader: (17)
Join Date: Apr 2009
Location: Atlanta, GA
Posts: 2,799
Total Cats: 1
i can get the hook up on upholstery work if i needed it and its a really good deal on the seat. i already have the slider and can modifie it if i need to. its either this or im getting kirkleys. (i kinda want to ovoid that)
Thread
Thread Starter
Forum
Replies
Last Post
Greasyman
General Miata Chat
2
09-28-2015 10:44 AM