msd ignition boost retard help
#1
Senior Member
Thread Starter
iTrader: (1)
Join Date: Apr 2007
Location: North Jersey
Posts: 717
Total Cats: 0
msd ignition boost retard help
i recently installed a begi s kit and was given a msd box for free. i want to install but have no instructions. can anybody tell me where the 4 wires hook up?
red
black
white
yellow
thanks.
red
black
white
yellow
thanks.
#3
The wires splice into the wiring between the CAS and the ECU.
MSD wire color to Harness wire color.
Black to Black/lt/Green
White to white ( on the CAS side)
Yellow to White (on the ecu side)
Red to White/Red
*Note the White Harness wire is cut .
Full instructions http://www.mossmotors.com/graphics/p...ns/999-120.pdf
MSD wire color to Harness wire color.
Black to Black/lt/Green
White to white ( on the CAS side)
Yellow to White (on the ecu side)
Red to White/Red
*Note the White Harness wire is cut .
Full instructions http://www.mossmotors.com/graphics/p...ns/999-120.pdf
#5
Senior Member
Thread Starter
iTrader: (1)
Join Date: Apr 2007
Location: North Jersey
Posts: 717
Total Cats: 0
holy smokes! It works!
i hooked the sucker up and the car fired right up. took it out and drove it all the way to redline without any detonation for the first time. car is a rocket.........i don't know how you guys are driving around with 250+ HP.
thanks for the schematics and a special thanks to the guy (i don't remember the name but he's in Chester, NJ) that GAVE it to me.
i hooked the sucker up and the car fired right up. took it out and drove it all the way to redline without any detonation for the first time. car is a rocket.........i don't know how you guys are driving around with 250+ HP.
thanks for the schematics and a special thanks to the guy (i don't remember the name but he's in Chester, NJ) that GAVE it to me.
Thread
Thread Starter
Forum
Replies
Last Post