New to the Site, Not new to miatas, Pro Am Drifter from FL
#1
New to the Site, Not new to miatas, Pro Am Drifter from FL
Hey all, just getting ready for the season this year with SWD. What I currently have set up is a Mazda Eunos Roadster (RHD Miata) with 250 HP fully built 1.8L engine. I am working on making much larger HP in excess of 450HP. Its caged and has tubular frame front end as well. Done all the work myself except the engine build. Had some help there. Gonna be in and out of the forums when i can but I am all over facebook. -Kurt Durjan --Kurtrox Customs hope to make some extra friends here and if i can help anyone just let me know.
Last edited by hozencool; 03-21-2012 at 11:56 AM. Reason: Me have A.D.D
#4
https://www.facebook.com/kurtrox.customs
https://www.facebook.com/kurtdurjan
Great pics on both sites. Still looking for an engine bay shot
https://www.facebook.com/kurtdurjan
Great pics on both sites. Still looking for an engine bay shot
#6
I dont have any great shots of just the engine. The ones on facebook are as i was building it the last time. Its currently out for the billet maincaps and main studs. I will be putting it back together one more time next week. the pic above is the latest pic. I also have some good video footage on youtube "kurtrox"
#13
So here a list of all the modifications I can think of at the moment: (not sure if this belongs here)
Exterior:
Fiberglass Body Kit / Customs Modifications to body work.
AIT Fiberglass Fenders
Shaved Door handles (probably putting back in soon)
De-badged
KurTrox Customs “Circuit Envy” Side Graphics Kit
Traklite Octane 15x8 on rear and Camber 15x6.5 on front
Set on Stance GR+ Coilovers
I-Concept Tie Rods with 10mm Spacers to get that steering angle
Eibach Oversized Sways
Energy Suspension Poly Bushings all around
Hard Top - Soft top removed for weight
Carbon Fiber Hood
Fog Lights w/ HID 8000K
Weight Reduction to chassis and body
Altezza Clear Black tail Lights w/ LED 3rd brake light
Whelen Custom Strobe Light Kit
LED Front Brake Light Bar
Sublime Green Pearl Paint Job
Spoiler on Rear
Power Disconnect on Hood
Aluminum Front Underbody Protection Plate
Tube Front End Frame
Interior:
Sparco Torino Seats with Simpson 5 point harnesses
Weight Reduction Removal of Carpets, pads, panels, windows, door internals Removed
Right Hand Drive Conversion
Custom Wiring Harness redone from scratch
Full Roll Cage from miatacage.com Welded In
AEM Boost Control, Oil Pressure, Wideband, EGT
Keyless ignition (Push to Start because race car)
Engine and Driveline:
Eagle H Beam Rods
Wiseco 9:1 Forged Pistons
Factory Forged Crank
Billet Main Caps with ARP Main Studs
ATI Super Damper with factory Crank Trigger Wheel
Boundary Billet Oil Pump Gears
SuperTech Dual Valve Spring Kit
SuperTech 1mm Oversize Valves
ARP Head Studs
Port Polish 5 Angle valve job on Head
Unshrouded Valves and Cylinder Area
Custom Port Polish Intake Manifold
Garrett SR20 T25 .48 Trim Turbo Charger with internal Wastegate
OBX Stainless Manifold
Top Mount Intercooler
RC 1000cc Fuel Injectors
Base Line FPR Set to 35Lbs
HKS BOV
Aluminum Race radiator with Dual 14” E-fans
AEM EMS-4 Series 2 Engine Management
Drilled / Slotted Rotors and Axxis PBR Ceramic brake Pads
Stainless Clutch Lines
Stainless Brake Lines
Hydraulic Handbrake
ARP Extended Wheel Studs with 20mm Spacers in rear 15mm in Front
F1 racing 11.7lbs Lightweight Flywheel 1 piece Chromoly
Competition Clutch 6 Puck Unsprung
Torsen T2 LSD in Rear
Oil Relocation and Cooler Kit With Fans
Exterior:
Fiberglass Body Kit / Customs Modifications to body work.
AIT Fiberglass Fenders
Shaved Door handles (probably putting back in soon)
De-badged
KurTrox Customs “Circuit Envy” Side Graphics Kit
Traklite Octane 15x8 on rear and Camber 15x6.5 on front
Set on Stance GR+ Coilovers
I-Concept Tie Rods with 10mm Spacers to get that steering angle
Eibach Oversized Sways
Energy Suspension Poly Bushings all around
Hard Top - Soft top removed for weight
Carbon Fiber Hood
Fog Lights w/ HID 8000K
Weight Reduction to chassis and body
Altezza Clear Black tail Lights w/ LED 3rd brake light
Whelen Custom Strobe Light Kit
LED Front Brake Light Bar
Sublime Green Pearl Paint Job
Spoiler on Rear
Power Disconnect on Hood
Aluminum Front Underbody Protection Plate
Tube Front End Frame
Interior:
Sparco Torino Seats with Simpson 5 point harnesses
Weight Reduction Removal of Carpets, pads, panels, windows, door internals Removed
Right Hand Drive Conversion
Custom Wiring Harness redone from scratch
Full Roll Cage from miatacage.com Welded In
AEM Boost Control, Oil Pressure, Wideband, EGT
Keyless ignition (Push to Start because race car)
Engine and Driveline:
Eagle H Beam Rods
Wiseco 9:1 Forged Pistons
Factory Forged Crank
Billet Main Caps with ARP Main Studs
ATI Super Damper with factory Crank Trigger Wheel
Boundary Billet Oil Pump Gears
SuperTech Dual Valve Spring Kit
SuperTech 1mm Oversize Valves
ARP Head Studs
Port Polish 5 Angle valve job on Head
Unshrouded Valves and Cylinder Area
Custom Port Polish Intake Manifold
Garrett SR20 T25 .48 Trim Turbo Charger with internal Wastegate
OBX Stainless Manifold
Top Mount Intercooler
RC 1000cc Fuel Injectors
Base Line FPR Set to 35Lbs
HKS BOV
Aluminum Race radiator with Dual 14” E-fans
AEM EMS-4 Series 2 Engine Management
Drilled / Slotted Rotors and Axxis PBR Ceramic brake Pads
Stainless Clutch Lines
Stainless Brake Lines
Hydraulic Handbrake
ARP Extended Wheel Studs with 20mm Spacers in rear 15mm in Front
F1 racing 11.7lbs Lightweight Flywheel 1 piece Chromoly
Competition Clutch 6 Puck Unsprung
Torsen T2 LSD in Rear
Oil Relocation and Cooler Kit With Fans
Last edited by hozencool; 03-21-2012 at 01:50 PM. Reason: added something to list
#14
Slowest Progress Ever
iTrader: (26)
Join Date: Oct 2007
Location: The coal ridden hills of Pennsylvania
Posts: 6,025
Total Cats: 304
I saw this list:
Then I noticed this, and thought "whhhaaattt?"
How much whp are you making? How much boost are you running? What turbo is that?
Eagle H Beam Rods
Wiseco 9:1 Forged Pistons
Factory Forged Crank
Billet Main Caps with ARP Main Studs
ATI Super Damper with factory Crank Trigger Wheel
Boundary Billet Oil Pump Gears
SuperTech Dual Valve Spring Kit
SuperTech 1mm Oversize Valves
ARP Head Studs
Port Polish 5 Angle valve job on Head
Unshrouded Valves and Cylinder Area
Custom Port Polish Intake Manifold
Garrett T25 .48 Trim Turbo Charger
OBX Stainless Manifold with internal Wastegate
Top Mount Intercooler
RC 1000cc Fuel Injectors
Base Line FPR Set to 35Lbs
HKS BOV
Aluminum Race radiator with Dual 14” E-fans
AEM EMS-4 Series 2 Engine Management
Drilled / Slotted Rotors and Axxis PBR Ceramic brake Pads
Stainless Clutch Lines
Stainless Brake Lines
Hydraulic Handbrake
ARP Extended Wheel Studs with 20mm Spacers in rear 15mm in Front
F1 racing 11.7lbs Lightweight Flywheel 1 piece Chromoly
Competition Clutch 6 Puck Unsprung
Torsen T2 LSD in Rear
Oil Relocation and Cooler Kit With Fans
Wiseco 9:1 Forged Pistons
Factory Forged Crank
Billet Main Caps with ARP Main Studs
ATI Super Damper with factory Crank Trigger Wheel
Boundary Billet Oil Pump Gears
SuperTech Dual Valve Spring Kit
SuperTech 1mm Oversize Valves
ARP Head Studs
Port Polish 5 Angle valve job on Head
Unshrouded Valves and Cylinder Area
Custom Port Polish Intake Manifold
Garrett T25 .48 Trim Turbo Charger
OBX Stainless Manifold with internal Wastegate
Top Mount Intercooler
RC 1000cc Fuel Injectors
Base Line FPR Set to 35Lbs
HKS BOV
Aluminum Race radiator with Dual 14” E-fans
AEM EMS-4 Series 2 Engine Management
Drilled / Slotted Rotors and Axxis PBR Ceramic brake Pads
Stainless Clutch Lines
Stainless Brake Lines
Hydraulic Handbrake
ARP Extended Wheel Studs with 20mm Spacers in rear 15mm in Front
F1 racing 11.7lbs Lightweight Flywheel 1 piece Chromoly
Competition Clutch 6 Puck Unsprung
Torsen T2 LSD in Rear
Oil Relocation and Cooler Kit With Fans
How much whp are you making? How much boost are you running? What turbo is that?
#18
ok so the turbo is wrong, that is my bad. The obx manifolds do not last long and im looking for a better solution for the 1.8 style head. I am looking for the turbo i will need. Currently have 280whp with the old t25 but the engine is apart at the moment getting the billet mains put in. ill have it back at the end of next week. I am aiming for the 450-600 hp area if i need to go that high, 450 should be fine all day with the work ive got into it.
#19
Im the guy on the right, as we were getting hit by water guns filled with ice water. I took second place at that drift event. Im just trying to get to first place in a miata, most guys cant say that when it comes to drifting a miata.
Last edited by hozencool; 03-21-2012 at 11:02 AM. Reason: wrong link
#20
ok so the turbo is wrong, that is my bad. The obx manifolds do not last long and im looking for a better solution for the 1.8 style head. I am looking for the turbo i will need. Currently have 280whp with the old t25 but the engine is apart at the moment getting the billet mains put in. ill have it back at the end of next week. I am aiming for the 450-600 hp area if i need to go that high, 450 should be fine all day with the work ive got into it.
I hear they make 450hp on only 3psi with stock exhaust.