**Aflac's MS thread plead for help**
#41
I don't really understand why you guys are even bothering with the boost KPA tables. We're not even using closed loop boost control so that table is irrelevant.
You should be messing with the duty cycle tables.
Even if you were trying to tune your KPa table, why would you set it all to 70 instead of the actual boost levels you wanted to see that that rpm/tps?
You should be messing with the duty cycle tables.
Even if you were trying to tune your KPa table, why would you set it all to 70 instead of the actual boost levels you wanted to see that that rpm/tps?
"Tuning the EBC:
Go to advanced > Boost kPa targets
This is how we tune boost. 100 = full boost (unlimited) 0 = no boost (wastegate)
Start with something low and work up from here."
---It wont let me copy the pic of the table, but the 1st 2 bins (1000/2000rpm) are 100 all the way up, and the rest are at 30...
Thread
Thread Starter
Forum
Replies
Last Post
Zaphod
MEGAsquirt
47
10-26-2018 11:00 PM
stoves
Suspension, Brakes, Drivetrain
5
04-21-2016 03:00 PM