Swapped 460's now idles at 3 grand, wtf?
#1
Slowest Progress Ever
Thread Starter
iTrader: (26)
Join Date: Oct 2007
Location: The coal ridden hills of Pennsylvania
Posts: 6,022
Total Cats: 304
Swapped 460's now idles at 3 grand, wtf?
So I threw my 460's in tonight, then I took my required fuel from 13.2 to 6.9. Then I turned the key. The car started right up, but it idled at 3,000 RPM. I did break the vacuum T for my blow off valve off when I took the top 1/2 of the intake off to yank my fuel rail. I plugged it though, and then it idled at 2200 RPM, perhaps I have another vacuum leak? Anyone ever have this happen?
#4
Slowest Progress Ever
Thread Starter
iTrader: (26)
Join Date: Oct 2007
Location: The coal ridden hills of Pennsylvania
Posts: 6,022
Total Cats: 304
Problem solved. You can ad this the the most dumbassed wrenching mistake section. My new injectors didn't have those round disc like spacers that go on before the pintle caps. I had to yank my 460's back out and rob the little plastic things from my stock injectors. It now idles, drives, and does everything like it should. I love doing the same job more than once because of my errors, NOT.
#8
Elite Member
iTrader: (9)
Join Date: Aug 2006
Location: Concord, North Carolina
Posts: 4,160
Total Cats: 6
Are you talking about the stock grommets that go around the pintle caps on the injectors?
When I put my RX7 550cc ones in the stock ones were a bitch to get on their and cracked a bit. Not all the way through.
Where can I find replacement that will fit?
When I put my RX7 550cc ones in the stock ones were a bitch to get on their and cracked a bit. Not all the way through.
Where can I find replacement that will fit?
Thread
Thread Starter
Forum
Replies
Last Post
Frank_and_Beans
Supercharger Discussion
13
09-12-2016 08:17 PM
JesseTheNoob
DIY Turbo Discussion
15
09-30-2015 02:44 PM