Is the neutral safety switch the same clutch switch that is used for launch control
#1
Senior Member
Thread Starter
iTrader: (7)
Join Date: Aug 2007
Location: Southern Indiana
Posts: 1,369
Total Cats: -1
Is the neutral safety switch the same clutch switch that is used for launch control
Is the neutral safety switch the same clutch switch that is used for launch control? I was wondering if you would be able to bypass the neutral safety switch and still use launch control/flat shift.
#2
In the '99 it is not. The '99+ has two switches. One on the floor that is the clutch interlock switch and another that is normally depressed but when you let the switch off it lets off. I bypassed the interlock switch by cutting the wires and twisting them together. The other I tapped MS into.
#5
i though one switch (one closest to firewall) is the "make sure pedel is pressed when engine start" and the other (one closest to driver seat) was the "disengage the cruse control"
what one is the one that gets the signal for the flatshift/launchcontrol?
I want to know cause i have FM's clutch bypass on the one on the firewall, so i dont have to press it to start the car
what one is the one that gets the signal for the flatshift/launchcontrol?
I want to know cause i have FM's clutch bypass on the one on the firewall, so i dont have to press it to start the car
#7
Supporting Vendor
iTrader: (5)
Join Date: Jun 2006
Location: Duluth, GA 30097
Posts: 803
Total Cats: 0
The switch at the top of the pedal is the one connected back to the ECU, and hence the one that can be easily tied in for use with flat shift/launch control with the MSPNP. And yes, the neutral switch is connected to the same circuit, which I'd recommend changing (snip) for serious use.
__________________
Jerry a.k.a. 'FoundSoul'
DIYAutoTune.com
'91 Miata BEGi S3 GT2560 w/ MSPNP - 14.1psi - 253whp, 232wtq
'95 Miata n/a
A few other cars....
Jerry a.k.a. 'FoundSoul'
DIYAutoTune.com
'91 Miata BEGi S3 GT2560 w/ MSPNP - 14.1psi - 253whp, 232wtq
'95 Miata n/a
A few other cars....
#9
Supporting Vendor
iTrader: (5)
Join Date: Jun 2006
Location: Duluth, GA 30097
Posts: 803
Total Cats: 0
Parallel. Check out the bottom right of page 4 here:
http://www.madracki.com/miata/images/wiring/91diag.pdf
http://www.madracki.com/miata/images/wiring/91diag.pdf
__________________
Jerry a.k.a. 'FoundSoul'
DIYAutoTune.com
'91 Miata BEGi S3 GT2560 w/ MSPNP - 14.1psi - 253whp, 232wtq
'95 Miata n/a
A few other cars....
Jerry a.k.a. 'FoundSoul'
DIYAutoTune.com
'91 Miata BEGi S3 GT2560 w/ MSPNP - 14.1psi - 253whp, 232wtq
'95 Miata n/a
A few other cars....
Thread
Thread Starter
Forum
Replies
Last Post
Zaphod
MEGAsquirt
47
10-26-2018 11:00 PM
graexodus
Miata parts for sale/trade
5
10-26-2015 01:48 PM