for the 99 guys running ms1
#1
for the 99 guys running ms1
what are u guys doing for crank signal??? a friend ask me to put MS on his 99 and not sure if i shout run a NA old school cam sensor. and take that plug out the back of the head. and what about the return less fuel system? im guessing u guys still run the stock ecu to run that. im looking for a write up but nothing found anyone got a link to a thread that could help or something.
thanks sebastien
thanks sebastien
#3
Elite Member
iTrader: (15)
Join Date: Dec 2007
Location: San Antonio, Texas
Posts: 4,847
Total Cats: 27
I use a MS1 and a CAS on my '99. MS controls fuel and spark.
The returnless system matters not. Just add larger injectors depending on how much boost (power) you plan on running. Stock '99 injectors are good to 6-7 psi (barely). Above that you need larger ones.
The returnless system matters not. Just add larger injectors depending on how much boost (power) you plan on running. Stock '99 injectors are good to 6-7 psi (barely). Above that you need larger ones.
#4
oright thanks guys... the onlything is that the car is going to be boosting at least 15+lbs... its a built engine... i think it already has 440cc or 550cc rc's... whats the stock fuel pump rated to? and if it cant support what fuel pump to put in? can a 190 or 255 in tank be put in... sorry for all the questions never worked on 99 or a street car with returnless. on some of the race cars we run aftermarket regulators and run the return back.
anyway i will do my homework a little.. if got any sugestions chime in
thanks
anyway i will do my homework a little.. if got any sugestions chime in
thanks
#6
Http://m-tuned.com
I run an MS 1 with stock M1 CAS and Fuel pump. I'm in the 15psi range with one of our rails.
I run an MS 1 with stock M1 CAS and Fuel pump. I'm in the 15psi range with one of our rails.
Thread
Thread Starter
Forum
Replies
Last Post
Frank_and_Beans
Supercharger Discussion
13
09-12-2016 08:17 PM
Greasyman
General Miata Chat
2
09-28-2015 10:44 AM