Chris Swearingen

iTrader: (1)

When I search, I for logging oil pressure I get lots of returns but didn't get the combination of those three common words to return a list of relevant posts.

I found the manual information for capturing, displaying and logging the input MS2-Extra Quick Guide to Tuning / MegaTune

Those of you who know me, know that any electronic thing I mess with is likely to release the magic white smoke that makes it work so please indulge me the simple questions.

My MS-II is wired up to accept a knock sensor signal on

Pad_int JP4/R1, Pad_ext SPR2 with JP4 jumpered to pin 15 of U1 hdr on MS2 , R1 removed on main board.

At least that is the Greek I copied from the pinout the builder provided me.

My question is, can I tap into the 93 sending unit wire that feeds my dash oil pressure gauge and feed it into the wire that I have set up for flex fuel or is there something that was set up for the flex fuel sensor that won't work with the oil pressure input?

If it won't work, is there another way to get the data in without doing anything more complicated than soldering two wires together outside the MS-II?

Does anyone know the voltage to pressure mapping for the stock sensor?

Does anyone else think I should drive a stock car?