Tuning tomorrow in colder weather
#1
Slowest Progress Ever
Thread Starter
iTrader: (26)
Join Date: Oct 2007
Location: The coal ridden hills of Pennsylvania
Posts: 6,025
Total Cats: 304
Tuning tomorrow in colder weather
Tomorrow I will be swapping in my brand new set of 460 PNP's and hooking up my new MBC. I will most likely be tuning for 12-14 psi, but I noticed that since the weather has gotten much colder than it was when I last tuned, my car has been running a little leaner. I uploaded my .msq and was questioning if there is anything I should change turn off before I VE Analzye. Any opinions/ flaming/ tips are welcome.
Attachment 18776
Attachment 18776
Last edited by thirdgen; 11-28-2010 at 09:43 PM.
#2
Are you running any MAT correction? Gair should compensate for IAT changes?
Its also worth mentioning that when I swapped out my OEM injectors for my 425cc units, I need a complete VE table re-tune even though I converted ReqFuel properly. It wasn't a like for like increase/decrease in relevant cells, it was a complete non-linear shift in different RPM load ranges. Possibly down to the RX8 injector spray pattern.
Its also worth mentioning that when I swapped out my OEM injectors for my 425cc units, I need a complete VE table re-tune even though I converted ReqFuel properly. It wasn't a like for like increase/decrease in relevant cells, it was a complete non-linear shift in different RPM load ranges. Possibly down to the RX8 injector spray pattern.
Thread
Thread Starter
Forum
Replies
Last Post
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM