How to rewire to get sequential fuel injection??
#1
Senior Member
Thread Starter
iTrader: (4)
Join Date: Feb 2011
Location: Crest Hill, IL
Posts: 742
Total Cats: 42
How to rewire to get sequential fuel injection??
I have my ecu from Revrent and it's set up for sequential fuel injection. What wiring change need to be made so they will work correctly together? Search mode didn't have a how to (i.e. run a wire from this pin to this injector). Car is a 2000. Thanks for the help.
#3
Senior Member
Thread Starter
iTrader: (4)
Join Date: Feb 2011
Location: Crest Hill, IL
Posts: 742
Total Cats: 42
Thank you for explaining it better. I swear, I am not trying to be stupid about this stuff, but there are some things I have an abundance of. Not getting it the first time, my picture's next to that.
#4
Forgive me as I don't know anything about your setup.
But if you are running stock coil packs they only run in batch as they are both linked together. 1 and 3 fire simultaniously and 2and 4 fire simultaniously. Only if you are running individual coil packs first then you can get sequential ignition. And even if your ECU is configured for sequential ignition your coil packs are still running as a batch.
Disregard this post if you have changed over your coil pack to something other than stock. And if I'm wrong someone go ahead and correct me; but that is my understanding of how the stock coil packs function.
But if you are running stock coil packs they only run in batch as they are both linked together. 1 and 3 fire simultaniously and 2and 4 fire simultaniously. Only if you are running individual coil packs first then you can get sequential ignition. And even if your ECU is configured for sequential ignition your coil packs are still running as a batch.
Disregard this post if you have changed over your coil pack to something other than stock. And if I'm wrong someone go ahead and correct me; but that is my understanding of how the stock coil packs function.
Thread
Thread Starter
Forum
Replies
Last Post