MS3, MS3x, for a 2002. What to buy?
#1
Elite Member
Thread Starter
iTrader: (3)
Join Date: Apr 2008
Location: Outside Portland Maine
Posts: 2,023
Total Cats: 19
MS3, MS3x, for a 2002. What to buy?
I'm going to buy the kit and start building my MS3 on my desk here, do I need anything besides the build kit and the MS3x? I don't have a stim, so I'm guessing I should get one of those as well? I just remember there being a few extra things to buy when I did the MS1 in my '94.
Now I will go read on the megasquirt forums so I don't have to ask too many stupid questions here as I'm building it.
Now I will go read on the megasquirt forums so I don't have to ask too many stupid questions here as I'm building it.
#7
Elite Member
Thread Starter
iTrader: (3)
Join Date: Apr 2008
Location: Outside Portland Maine
Posts: 2,023
Total Cats: 19
So it sounds like I only need the MS3 kit, the MS3x, and a stim?
It looks like the MS3 comes with a plug to make a wiring harness, but I can't tell if the MS3x does or not. Does anybody know? If I can find the miata plug somewhere, I will try to build the harness myself.
It looks like the MS3 comes with a plug to make a wiring harness, but I can't tell if the MS3x does or not. Does anybody know? If I can find the miata plug somewhere, I will try to build the harness myself.
#8
Boost Czar
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,504
Total Cats: 4,079
There is no need to do "Joe's Spark Circuit".
When you buy the MS3 kit and MS3x, they come with the DB37 connectors you need to make a harness. Talk to y8s about the mazda ECU connector, I think he has a spare.
The Input Circuit you DO need to add is this one outlined here: http://westfieldmx5.devocht.com/index.php?section=35
see Step 50.
You will also need to do the alternator control circuit outlined above.
Also very little needs actually be populated on the mainboard, so save yourself the trouble when building it and omit the circuits that are pointless. It should also be outlined on the build thread linked above.
Don't follow any other "additional/optional circuits" or the step 65.
When you buy the MS3 kit and MS3x, they come with the DB37 connectors you need to make a harness. Talk to y8s about the mazda ECU connector, I think he has a spare.
The Input Circuit you DO need to add is this one outlined here: http://westfieldmx5.devocht.com/index.php?section=35
see Step 50.
You will also need to do the alternator control circuit outlined above.
Also very little needs actually be populated on the mainboard, so save yourself the trouble when building it and omit the circuits that are pointless. It should also be outlined on the build thread linked above.
Don't follow any other "additional/optional circuits" or the step 65.
#9
Elite Member
iTrader: (10)
Join Date: Jun 2006
Location: Athens, Greece
Posts: 5,979
Total Cats: 356
skidude, I have an MS3+MS3X+alternator controller+A/C controller etc etc for any 01-05 ready and tested on the stim but not on the car. It would save you A LOT of trouble if you are to buy it ready and tested working instead of building it from scratch. PM me if you are interested in it.
#10
There is a DB37 included for the main board, but the MS3X DB37 is sold separately (we figured most people would be buying the harness anyway).
Joe's spark circuit would only be of use if you were using the main board spark outputs; I see no point in doing that if you have an MS3X. The MS3X outputs go low when powered up until commanded to spark; there isn't any chance of a pop when you turn the key on.
Joe's spark circuit would only be of use if you were using the main board spark outputs; I see no point in doing that if you have an MS3X. The MS3X outputs go low when powered up until commanded to spark; there isn't any chance of a pop when you turn the key on.
#13
Elite Member
Thread Starter
iTrader: (3)
Join Date: Apr 2008
Location: Outside Portland Maine
Posts: 2,023
Total Cats: 19
I assume I still need a GM IAT and that open is better? That's the one I used on the last setup, and I didn't bother with a bung, I just drilled and tapped the charge pipe. Seemed to work alright, though sometimes it would act like it heat soaked when I came out from grocery shopping.
#14
mkturbo.com
iTrader: (24)
Join Date: May 2006
Location: Charleston SC
Posts: 15,178
Total Cats: 1,681
I assume I still need a GM IAT and that open is better? That's the one I used on the last setup, and I didn't bother with a bung, I just drilled and tapped the charge pipe. Seemed to work alright, though sometimes it would act like it heat soaked when I came out from grocery shopping.
#19
Elite Member
Thread Starter
iTrader: (3)
Join Date: Apr 2008
Location: Outside Portland Maine
Posts: 2,023
Total Cats: 19
There is no need to do "Joe's Spark Circuit".
When you buy the MS3 kit and MS3x, they come with the DB37 connectors you need to make a harness. Talk to y8s about the mazda ECU connector, I think he has a spare.
The Input Circuit you DO need to add is this one outlined here: http://westfieldmx5.devocht.com/index.php?section=35
see Step 50.
You will also need to do the alternator control circuit outlined above.
Also very little needs actually be populated on the mainboard, so save yourself the trouble when building it and omit the circuits that are pointless. It should also be outlined on the build thread linked above.
Don't follow any other "additional/optional circuits" or the step 65.
When you buy the MS3 kit and MS3x, they come with the DB37 connectors you need to make a harness. Talk to y8s about the mazda ECU connector, I think he has a spare.
The Input Circuit you DO need to add is this one outlined here: http://westfieldmx5.devocht.com/index.php?section=35
see Step 50.
You will also need to do the alternator control circuit outlined above.
Also very little needs actually be populated on the mainboard, so save yourself the trouble when building it and omit the circuits that are pointless. It should also be outlined on the build thread linked above.
Don't follow any other "additional/optional circuits" or the step 65.
And for future parts, do I need any pieces that didn't come with the kit?
Edit: The green dotted lines I need to add, I know this.
#20
2 Props,3 Dildos,& 1 Cat
iTrader: (8)
Join Date: Jun 2005
Location: Fake Virginia
Posts: 19,338
Total Cats: 573
The TL082 doesn't come with the kit.. nor do many of the resistors and capacitors for Frank's circuit you linked. He does have a parts list on his site.
http://westfieldmx5.devocht.com/inde...on=35&page=102
For the NB Alternator control, you need to verify 100% that it works before installing it. This can be done with a multimeter and a variable power supply that goes from about 10-16V. It must be verified to hold the setpoint between 14.1 and 14.3 or you will either fry your ... well everything electrical... or never charge your battery.
http://westfieldmx5.devocht.com/inde...on=35&page=102
For the NB Alternator control, you need to verify 100% that it works before installing it. This can be done with a multimeter and a variable power supply that goes from about 10-16V. It must be verified to hold the setpoint between 14.1 and 14.3 or you will either fry your ... well everything electrical... or never charge your battery.