Wideband connected to options plug
#1
Wideband connected to options plug
Hey guys I recently got my MSPNP2 and an AEM uego wideband.
Today k installed it for the first time and the wideband did not turn on. I connected it to the options plug that comes with the ecu..
I used these pins
This was my screen once I installed the base map
The afr gauge remained like this until i went into tools > calibrate afr and set the wideband to AEM WB 31-4999 or something like that... But i read it should be 14.7 and it was like at 6 or something...
I plan on boosting my 91 1.6L but I'm still N/A as of now
Today k installed it for the first time and the wideband did not turn on. I connected it to the options plug that comes with the ecu..
I used these pins
This was my screen once I installed the base map
The afr gauge remained like this until i went into tools > calibrate afr and set the wideband to AEM WB 31-4999 or something like that... But i read it should be 14.7 and it was like at 6 or something...
I plan on boosting my 91 1.6L but I'm still N/A as of now
#3
Moderator
iTrader: (12)
Join Date: Nov 2008
Location: Tampa, Florida
Posts: 20,664
Total Cats: 3,013
I don't think the uego is supposed to get power from that pin on the ecu. I think that is where the ecu gets power. The uego needs a location that can supply a high amp draw. I use the hot lead for the power windows under the center console.
Thread
Thread Starter
Forum
Replies
Last Post
chriscar
Miata parts for sale/trade
10
01-25-2010 04:24 PM