92Miata

iTrader: (3)

I have am having issues with Sync loss errors code 38, and 39. I cant find any solid ways to fix it.

my set up is;
94 chassis
99 motor with, tps, water temp sensor, vics,injectors.
94 coils
94 cas

Is the issue just a part of running a CAS ?

I have the 99 crank sensor i could put on but kinda dont want to.

I attached a log, the sync loss is at the end of it.

Reverant

iTrader: (10)

MS2V3 or DIYPNP?

92Miata

iTrader: (3)

Ms2v3

Reverant

iTrader: (10)

You need to add the optoisolation circuit that is present in the MS2 for the crank sensor, to the cam sensor as well.

92Miata

iTrader: (3)

Do you have a link to a correct diagram and what pins ?

I googled it but found a few diffrent topics on it.

Braineack

iTrader: (62)

The cam input it what is labled SPR1.

92Miata

iTrader: (3)

Ok that's the one I was looking at.

Just gotta make sure if have the parts then.

Reverant

iTrader: (10)

Remember to remove the parts from your current cam circuit (ie the 5V pullups and the cap if you have one).

92Miata

iTrader: (3)

I will have to look at my manual when I get home to a computer to see what to check and make sure I remove.

Thanks for all the help it will be nice to get rid of thu sync loss.

92Miata

iTrader: (3)

I built this following the mega manual and the wikki page, from what I can tell there is nothing about installing a cap or 5v pull up right ?

If I would have installed it where would I ? I want to be sure I know where to look and that I'm not just missing something.

Braineack

iTrader: (62)

I think he was assuming you had built MSI inputs, not MSII.

92Miata

iTrader: (3)

Well since the local radioshack sucks i have no spare 4n25.

yay just ordered a 55 cent part and pay $3 dollars in shipping.