ReallyRottenTurbo

iTrader: (1)

first things first.
04 MSM
Rev built ms2+

So.. been away for a while trying to get all my other crap working... ( 61 caddy, lifted jeep, and Subaru's... i put this on the back burner for a month so so...

original problem we noticed that the fans were not turning on as should.. caused car to get hot on way home.. so i tested all 3 relays they test out to spec. little to no resistance when i bench activate the coil of the relay. i plugged in the lab top and lowered the temp threshold that activates the fans to 100 degress started up the car and got it to that temp according to the computer was above it. still nothing..

for what ever reason i decided to jump the relay on the driver side fender and fans turned on.. put relay back on got in car rehooked up labtop and now i get a error and the car cranks but wont start.. and im not hearing the fuel pump prime like usual... i looked over all fuses the appear to be good and not blown...

i took ecu out and nothing looks burned or f'ed up on board... but i know that doesn't mean anything

so now i created another problem and not sure what to do... anyone?? help greatly appreciated!

see screenshot of error code tunerstudio gave me...

ryansmoneypit

iTrader: (6)

Hope you had the last tune saved in a different file.. looks like it didn't like the characters you used to name it last?

ReallyRottenTurbo

iTrader: (1)

thats odd becuase i didnt rename anything on the tune.. but this error came up.. anyone else have insight? i am hoping i have a older version of my tune some where or ill be building a new one...

Nabisco

What are your fan settings under CAN1?

ReallyRottenTurbo

iTrader: (1)

i tryed testing fan setting and lowered the temp setting no luck... now i have bigger issues... was posted earlier and im lost.