i <3 Meth!
#1
Senior Member
Thread Starter
iTrader: (2)
Join Date: Nov 2007
Location: orlando, FL
Posts: 558
Total Cats: 0
i <3 Meth!
wowsers is it awesome to be running meth injection y0! only problem now is i need a gas tank's worth of methanol to last me....i drained about 1-1 1/2 gallons worth of methanol in a trip that's less than 2 miles!!
#3
Senior Member
Thread Starter
iTrader: (2)
Join Date: Nov 2007
Location: orlando, FL
Posts: 558
Total Cats: 0
i know cjern! i was freakin out when i got home, but the car ran fine..... nothing wrong at all....well it wasn't a 1 and a 1/2 gallon, i'm sorry.. it was a 1/2 gallon each 2 mile trip... which is absurdly still TOO much!
#7
Senior Member
Thread Starter
iTrader: (2)
Join Date: Nov 2007
Location: orlando, FL
Posts: 558
Total Cats: 0
what do you mean i have my capacity wrong? i know i don't have a hole in my meth lines.... there's absolutely no leak at all lol...it's just spraying a crapholey load of meth! if it helps any... i used the biggest nozzle the DO kit came with.... it's the basic kit
#8
uhh goku you need to size the meth spray to your hp not just what you think is right. FWIW the biggest nozzel i see there is 14 gph that mother is big enough to run a 730 hp setup. A 300 hp setup using WI as a standalone for example would use about 8 or so gph being conservative with the math. My bsfc is pretty good so i get away with using abit over 5gph. Please take some time to size the meth jets properly and you will see alot more gains. Oh and fwiw that much WI could lock your motor it is possible. 17 gph is insane even comming from me.
oh snap i just remembered this from joes posts
"‘Twas a nice and simple setup that kept the lines short and didn’t kill any trunk space- two of my major design goals. Unfortunately, I soon found out that the washer bottle is entirely too small. I measured it out of the car at 1.65 liters, but due to the odd shape and placement of the fitting I’d say that only about 1 liter of this is actually useful capacity. (this is a US-spec NA without ABS) What this translates to is <50 miles of hard driving between refills" So it seems you have abit of an anomoly using 1.5 liters in 2 miles is doable.
oh snap i just remembered this from joes posts
"‘Twas a nice and simple setup that kept the lines short and didn’t kill any trunk space- two of my major design goals. Unfortunately, I soon found out that the washer bottle is entirely too small. I measured it out of the car at 1.65 liters, but due to the odd shape and placement of the fitting I’d say that only about 1 liter of this is actually useful capacity. (this is a US-spec NA without ABS) What this translates to is <50 miles of hard driving between refills" So it seems you have abit of an anomoly using 1.5 liters in 2 miles is doable.
Last edited by magnamx-5; 06-07-2008 at 10:29 AM.
Thread
Thread Starter
Forum
Replies
Last Post
jtothawhat
Engine Performance
0
01-19-2009 04:42 PM
petersdd
Methanol/Water Injection
15
04-01-2007 06:14 PM