Parting Begi based turbo kit
#1
Parting Begi based turbo kit
GT2860RS clocked with Begi Bracket new adjustable wastegate less than 500 miles! SOLD
Begi Manifold for 1.8 SOLD
Begi Stainless Divorced Downpipe: SOLD!
Used LM1: SOLD!
M-Tuned Coolant Reroute SOLD!
RX7 Injectors SOLD!
1.8 Rear diff with 4.1 and KAAZ 1.5 way LSD installed for the whole swap, axles, driveshaft, carrier. Carrier has Mazdaspeed bushings installed. SOLD!
AEM EMS for 90 to 95 Miata, Still have the extra plug and pins unused with box
I also will include the EMS ONLY for $800 Shipped[/B]
FM Twincooler: $400+ Shipping (I need to get a box that will fit this so I can ship it)
Begi Manifold for 1.8 SOLD
Begi Stainless Divorced Downpipe: SOLD!
Used LM1: SOLD!
M-Tuned Coolant Reroute SOLD!
RX7 Injectors SOLD!
1.8 Rear diff with 4.1 and KAAZ 1.5 way LSD installed for the whole swap, axles, driveshaft, carrier. Carrier has Mazdaspeed bushings installed. SOLD!
AEM EMS for 90 to 95 Miata, Still have the extra plug and pins unused with box
I also will include the EMS ONLY for $800 Shipped[/B]
FM Twincooler: $400+ Shipping (I need to get a box that will fit this so I can ship it)
Last edited by avante43; 04-30-2010 at 01:23 PM.
#2
Begi S Intercooler with pipes and welded on flange for TIAL BOV
Im selling the whole begi-s intercooler kit, with the lower radiator hose reroute and heater reroute that comes with it. It has a tial V-band flange welded on the cold side in the wheel well (that was the only place this huge BOV would fit)
It also has a bung for the IAT sensor where BEGI normally puts it. $600+ shipping
3" enthuza exhaust with custom made 3" metal core stainless cat.
The metal cor cat is custom made to bolt onto a 2.5" flange on the downpipe side and a 3" on the exhaust side.
This lets you bolt on a 3" exhaust to a standard Begi or FM downpipe that has a 2.5" flange. $400+ shipping for both the exhaust and cat.
Ill post pics and prices when I get them off of the car.
Im selling the whole begi-s intercooler kit, with the lower radiator hose reroute and heater reroute that comes with it. It has a tial V-band flange welded on the cold side in the wheel well (that was the only place this huge BOV would fit)
It also has a bung for the IAT sensor where BEGI normally puts it. $600+ shipping
3" enthuza exhaust with custom made 3" metal core stainless cat.
The metal cor cat is custom made to bolt onto a 2.5" flange on the downpipe side and a 3" on the exhaust side.
This lets you bolt on a 3" exhaust to a standard Begi or FM downpipe that has a 2.5" flange. $400+ shipping for both the exhaust and cat.
Ill post pics and prices when I get them off of the car.
Last edited by avante43; 04-30-2010 at 01:23 PM.
#5
I still have the whoel thing, so I am planning on selling it as a whole swap.
I will include drive shaft, axles, the whole diff assembly for $1000.
I think thats the going price for a normal torsen swap. The diff has the 4.1 gears, kaaz, and the mazda mounts installed in the carrier.
This thing is heavy and I wont be able to get it out of the car until sometime this coming week.
I will include drive shaft, axles, the whole diff assembly for $1000.
I think thats the going price for a normal torsen swap. The diff has the 4.1 gears, kaaz, and the mazda mounts installed in the carrier.
This thing is heavy and I wont be able to get it out of the car until sometime this coming week.
#6
I just got it off of the car.
Im selling the whole begi-s intercooler kit, with the lower radiator hose reroute and heater reroute that comes with it. It has a tial V-band flange welded on the cold side in the wheel well (that was the only place this huge BOV would fit)
It also has a bung for the IAT sensor where BEGI normally puts it.
I can sell the whole setup with the BOV for $800 shipped to you or without the BOV for $650 Shipped to you. If you are interested, let me know, we can work something out.
Im selling the whole begi-s intercooler kit, with the lower radiator hose reroute and heater reroute that comes with it. It has a tial V-band flange welded on the cold side in the wheel well (that was the only place this huge BOV would fit)
It also has a bung for the IAT sensor where BEGI normally puts it.
I can sell the whole setup with the BOV for $800 shipped to you or without the BOV for $650 Shipped to you. If you are interested, let me know, we can work something out.
#7
mkturbo.com
iTrader: (24)
Join Date: May 2006
Location: Charleston SC
Posts: 15,178
Total Cats: 1,681
Did Begi port the Wastegate on the turbo? I might be interested in it later this week once Wachovia get my money back. Also do you have the full specs for it and a link to your dyno would be nice. I briefly looked for it and could not find it.
#8
https://www.miataturbo.net/diy-turbo-discussion-14/1-8-na-gt28rs-86ar-dyno-42974/
That dyno was at 12 with a slight spike to about 12.5 psi when the boost was coming on.
The turbo is an off the shelt GT28RS .86, AKA the disco potato
I did not get the turbo wastegate ported by begi. It has the 3 inch inlet and 2 inch outlet.
#9
mkturbo.com
iTrader: (24)
Join Date: May 2006
Location: Charleston SC
Posts: 15,178
Total Cats: 1,681
Here's the link
https://www.miataturbo.net/showthread.php?t=42974
That dyno was at 12 with a slight spike to about 12.5 psi when the boost was coming on.
The turbo is an off the shelt GT28RS .86, AKA the disco potato
I did not get the turbo wastegate ported by begi. It has the 3 inch inlet and 2 inch outlet.
https://www.miataturbo.net/showthread.php?t=42974
That dyno was at 12 with a slight spike to about 12.5 psi when the boost was coming on.
The turbo is an off the shelt GT28RS .86, AKA the disco potato
I did not get the turbo wastegate ported by begi. It has the 3 inch inlet and 2 inch outlet.
Thread
Thread Starter
Forum
Replies
Last Post
kronikker
Miata parts for sale/trade
17
10-06-2015 10:18 PM
Andifer
Miata parts for sale/trade
8
09-23-2015 05:43 PM