[fs] turbo bp cams
#1
Senior Member
Thread Starter
iTrader: (12)
Join Date: May 2008
Location: Roselle, Illinois
Posts: 849
Total Cats: -34
[fs] turbo bp cams
Well i hate to part with these but i need to get some money going for a megasquirt. I have for sale a set of BP26 cams, these are super rare turbo cams from the JDM BPT/BPD 1.8 turbo awd motor. These cams can only be used with HLA lifters.
Intake cam duration 233° @ 0.003"
Intake cam opening 2° BTDC
Intake cam closing 51° ABDC
Intake cam lobe height 44.094mm (1.7360")
Intake cam base circle 35.941mm (1.415")
Intake valve lift 8.1534mm (0.321")
Exhaust cam duration 247° @ 0.003"
Exhaust cam opening 59° BBDC
Exhaust cam closing 8° ATDC
Exhaust cam lobe height44.600mm (1.7560")
Exhaust cam base circle35.941mm (1.415")
Exhaust valve lift 8.6614mm (0.341")
Valve overlap 10°
$200 shipped con us.
Intake cam duration 233° @ 0.003"
Intake cam opening 2° BTDC
Intake cam closing 51° ABDC
Intake cam lobe height 44.094mm (1.7360")
Intake cam base circle 35.941mm (1.415")
Intake valve lift 8.1534mm (0.321")
Exhaust cam duration 247° @ 0.003"
Exhaust cam opening 59° BBDC
Exhaust cam closing 8° ATDC
Exhaust cam lobe height44.600mm (1.7560")
Exhaust cam base circle35.941mm (1.415")
Exhaust valve lift 8.6614mm (0.341")
Valve overlap 10°
$200 shipped con us.
#7
Senior Member
Thread Starter
iTrader: (12)
Join Date: May 2008
Location: Roselle, Illinois
Posts: 849
Total Cats: -34
i thought i read some where you couldn't use these with solid lifters, but from my few minutes of searching i might be wrong,
http://www.clubprotege.com/forum/sho...ight=solid+hla
ill keep searching to see if i can find a more detailed explanation,
http://www.clubprotege.com/forum/sho...ight=solid+hla
ill keep searching to see if i can find a more detailed explanation,
#13
Chances are the base circle is too large, which means once you put solid lifters in and measure for shims the shim distance will be extremely small. You could always have the tips in the solid lifter machined down a bit. Also the opening and closing ramps are much more mild for hyd. lifters. You could make them work, but they won't be ideal.
Thread
Thread Starter
Forum
Replies
Last Post