NA Megasquirt, oil filter adapter, ECU connectors for DIY MS
09-02-2011, 05:27 PM
#1
Junior Member
Thread Starter
iTrader: (4)
Join Date: May 2009
Location: Novi, MI
Posts: 308
Total Cats: 1
oil filter adapter for oil cooler, gauges
Oil filter adapter/spacer. Glowshift brand. I believe it was ~$40 on ebay, so I'll take $30 shipped. Includes AN fittings, 1/8" NPT fittings for gauges or just plug them with the supplied bolts.
Last edited by Larimer; 09-15-2011 at 02:44 PM.
0
09-03-2011, 10:38 AM
#3
Newb
Join Date: Mar 2010
Posts: 6
Total Cats: 0
I just got done rebuilding my 95 1.8 motor. I used 99 pistons for higher compression would like to be able to increase increase injector size. Would the stand alone allow me to do this. Also how much wiring would I need to do or could I just plug and play.
0
09-06-2011, 11:37 AM
#8
Junior Member
Thread Starter
iTrader: (4)
Join Date: May 2009
Location: Novi, MI
Posts: 308
Total Cats: 1
V3 board I believe, but I'll check. You can't really mess up a sandwich plate. It's a piece of metal with some holes drilled in it. Stock filter size I believe, but I've never used it.
Edit: V3 board confirmed.
Edit: V3 board confirmed.
Last edited by Larimer; 09-06-2011 at 06:48 PM.
0
09-09-2011, 01:16 AM
#10
Senior Member
Join Date: Mar 2011
Location: Louisville ky
Posts: 583
Total Cats: -114
Is there some info on this, I know about the mspnp, but not the v3. So this is a plug and play deal formula 95?
0
09-09-2011, 06:41 AM
#11
Junior Member
Thread Starter
iTrader: (4)
Join Date: May 2009
Location: Novi, MI
Posts: 308
Total Cats: 1
Go to DIYAutotune and look at their stuff. This is a kit you build yourself, not one of their prebuilt kits. It will plug directly into a 95, but you'll need a GM AIT ( http://www.diyautotune.com/catalog/g...tail-p-62.html ) and to run a vacuum line to the MS. Also a wideband will plug in, or you can just wire in the stock o2 sensor.
0
09-12-2011, 04:51 PM
#14
Junior Member
Thread Starter
iTrader: (4)
Join Date: May 2009
Location: Novi, MI
Posts: 308
Total Cats: 1
Updated OP with as much information as I've got about the MS.
Trey, I'm not sure what fuel pump mod you're talking about, no A/C mods done either. If you want this, I'll give you a good discount on it since you're my hero.
Ruben, It includes what you see in the picture, the extra connectors are sold. It will plug directly into 94-95 connectors (I think 90-97 are the same connector, you would just have to redo the harness for the other years I believe).
Edit: Saw the 1.6 needs extra stuff for the fuel pump. No, I don't believe it has that done.
Trey, I'm not sure what fuel pump mod you're talking about, no A/C mods done either. If you want this, I'll give you a good discount on it since you're my hero.
Ruben, It includes what you see in the picture, the extra connectors are sold. It will plug directly into 94-95 connectors (I think 90-97 are the same connector, you would just have to redo the harness for the other years I believe).
Edit: Saw the 1.6 needs extra stuff for the fuel pump. No, I don't believe it has that done.
Last edited by Larimer; 09-12-2011 at 05:02 PM.
0
09-13-2011, 02:30 AM
#15
Ruben, It includes what you see in the picture, the extra connectors are sold. It will plug directly into 94-95 connectors (I think 90-97 are the same connector, you would just have to redo the harness for the other years I believe).
pm me best price you can do shipped to sacramento,ca.
pm me best price you can do shipped to sacramento,ca.
0
