1.6 Built Motor, M45 supercharger, OBX Header, RX7 Injectors
03-25-2015, 11:42 AM
#1
Junior Member
Thread Starter
iTrader: (3)
Join Date: Apr 2010
Location: South Bay, CA
Posts: 351
Total Cats: -2
1.6 Built Motor, M45 supercharger, OBX Header, RX7 Injectors
Reposting the remaining parts and things I've taken apart since the last time. All parts located in Santa Fe Springs, CA. PM me for the quickest answer. Thanks.
1.6L short nose block with built bottom end (Supertech 8.8 pistons, Manley rods, ACL bearings, ARP Main/Head/Rod bolts) with balanced rotating assembly = SOLD
M45 Supercharger setup = SOLD
1.6 OBX Header (Less than 1000k miles on it. Threads on O2 bung a little torn up but can be cleaned with a tap set easily) = SOLD
RX7 Injectors = SOLD
1.6 Intake Manifold with fuel rail, FPR, etc (complete unit with some porting/polishing as pictured) = $100
1.6 Hondata Intake Manifold Gasket = SOLD
1.6L short nose block with built bottom end (Supertech 8.8 pistons, Manley rods, ACL bearings, ARP Main/Head/Rod bolts) with balanced rotating assembly = SOLD
M45 Supercharger setup = SOLD
- M45 Supercharger
- Intake Elbow
- CAI with AFE Filter
- Intercooler
- Intercooler piping (may need to be modified)
- Track Dog Racing 150mm overlay pulley
- Spare bypass actuator (new in package, known part to fail)
- Mounting brackets for supercharger
- Supercharger belt (some wear but useable)
1.6 OBX Header (Less than 1000k miles on it. Threads on O2 bung a little torn up but can be cleaned with a tap set easily) = SOLD
RX7 Injectors = SOLD
1.6 Intake Manifold with fuel rail, FPR, etc (complete unit with some porting/polishing as pictured) = $100
1.6 Hondata Intake Manifold Gasket = SOLD
Last edited by comradefks; 04-05-2015 at 07:05 PM.
Reply
0
0
04-03-2015, 07:08 PM
#10
Junior Member
Thread Starter
iTrader: (3)
Join Date: Apr 2010
Location: South Bay, CA
Posts: 351
Total Cats: -2
Couple items to add. Will get pics up shortly.
1.6 Test Pipe - $40 (not off the car yet. Works fine, just need a different one for the new motor.)
(3) 225/50-15 Toyo RR tires - $120
2/32" tread remaining on them. Should be good for about a weekend or so. (2) are from 2013 and (1) from 2012. (1) has a flat spot but it's managable. (2) has a small tear on the sidewall beading surface. I ran them on track with no issues. Great tires, great grip. Don't ask me about heat cycles, I don't know since I bought them used too.
1.6 Test Pipe - $40 (not off the car yet. Works fine, just need a different one for the new motor.)
(3) 225/50-15 Toyo RR tires - $120
2/32" tread remaining on them. Should be good for about a weekend or so. (2) are from 2013 and (1) from 2012. (1) has a flat spot but it's managable. (2) has a small tear on the sidewall beading surface. I ran them on track with no issues. Great tires, great grip. Don't ask me about heat cycles, I don't know since I bought them used too.
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
Frank_and_Beans
Supercharger Discussion
13
09-12-2016 08:17 PM
