Part out!!!! NA
#1
My NUMBER IS 770-815-5498 Text preferably.
LOCATION: GWINNETT
Time has come to say good bye. I'll sit on whatever doesn't sell. I'm in no rush. Especially the harder to find pieces. EVERYTHING IS STILL IN/ON THE CAR Everything is all over the place in the listing. I will organize later. As well as pictures upon request.
Update (6/12/16) Engine -has 1300 miles since I rebuilt it-
$1000 delivered within an hour range from me. -99head And intake manifold with stock nb header.
-94-95 4pin coilpack
-94-95 alternator.
-94-97 cas -valve cover to oil pan.
-spark plug wires.
-revG coolant reroute
-new sensors
-new head gasket and associated seals
-new water pump and timing belt
-heater core hoses
-upper and lower one piece radiator hoses.
FULLY DRESSED
HKS muffler - $350 -included midpipe, NA cat, and test pipe
-fidanza lightweight flywheel (either 8lb or 10lb need to verify) -$250
Center console $200
Clutch and pressure plate with about 4K -$80
Universal overfenders $150
Mazdaspeed strut bar $200
Mazdaspeed header $400 THIS IS FOR AN NB 99-05 HEAD ONLY!
Tein flex coilovers (one was damaged and will need a new lower mount ) $600
Arc rad cap $50
Arc cooling panel $250
Work side skirts $200 $
Racing beat FRONT bumper (has damage but no chunks are missing) $200
Hood $150 Deck lid $80
Finish panel $80
Rear bumper $80
Maxim work heat shield $80
Lc1 $100
1.8 test pipe $80
Flyin Miata sway bars (front and rear/ no end links) $125
4x Bbs reps, one barrel has a hole $150
Nitto neo gen 205-50-15 x3 +1 with sidewall damage (4 total with 1200 street miles) - $ 200
Tub and suspension components as well as hubs are available. Anything you don't see, just ask
LOCATION: GWINNETT
Time has come to say good bye. I'll sit on whatever doesn't sell. I'm in no rush. Especially the harder to find pieces. EVERYTHING IS STILL IN/ON THE CAR Everything is all over the place in the listing. I will organize later. As well as pictures upon request.
Update (6/12/16) Engine -has 1300 miles since I rebuilt it-
$1000 delivered within an hour range from me. -99head And intake manifold with stock nb header.
-94-95 4pin coilpack
-94-95 alternator.
-94-97 cas -valve cover to oil pan.
-spark plug wires.
-revG coolant reroute
-new sensors
-new head gasket and associated seals
-new water pump and timing belt
-heater core hoses
-upper and lower one piece radiator hoses.
FULLY DRESSED
HKS muffler - $350 -included midpipe, NA cat, and test pipe
-fidanza lightweight flywheel (either 8lb or 10lb need to verify) -$250
Center console $200
Clutch and pressure plate with about 4K -$80
Universal overfenders $150
Mazdaspeed strut bar $200
Mazdaspeed header $400 THIS IS FOR AN NB 99-05 HEAD ONLY!
Tein flex coilovers (one was damaged and will need a new lower mount ) $600
Arc rad cap $50
Arc cooling panel $250
Work side skirts $200 $
Racing beat FRONT bumper (has damage but no chunks are missing) $200
Hood $150 Deck lid $80
Finish panel $80
Rear bumper $80
Maxim work heat shield $80
Lc1 $100
1.8 test pipe $80
Flyin Miata sway bars (front and rear/ no end links) $125
4x Bbs reps, one barrel has a hole $150
Nitto neo gen 205-50-15 x3 +1 with sidewall damage (4 total with 1200 street miles) - $ 200
Tub and suspension components as well as hubs are available. Anything you don't see, just ask
#4
Does it say any other aftermarket parts listed in the description in reference?
Only rebuilt with OEM parts
All stock. Head is shaved .060 and pressure checked fine. Bottom end is from a 95 and was not touched (didn't burn any oil) and every seal has been replaced. From the head gasket to everything surrounding Any other question. My number is listed and you can contact me.
Only rebuilt with OEM parts
All stock. Head is shaved .060 and pressure checked fine. Bottom end is from a 95 and was not touched (didn't burn any oil) and every seal has been replaced. From the head gasket to everything surrounding Any other question. My number is listed and you can contact me.