elesjuan

iTrader: (11)

Local friend crnrhrd installed an older FMII kit on his car about 2 months ago. Last weekend we removed the manifold and turbo to dig 3 broken studs out which wasn't a very fun task. Inspecting the old studs we believe they were very likely 5.8 grade standard run of the mill hardware store studs which may or may not have been originally installed in the manifold, considering we picked it up 2nd hand its hard to say. Basically what I dug out of the manifold was hardly better quality than threaded stock you could pickup from Lowes, I drilled through it with a 25 year old twist bit like a knife through liquid butter.

Unable to find a cheap solution for some slightly stronger studs we've come upon a supplier where we can get some 10.9 grade M8x1.25 stock to replace what came in FM/BEGi manifolds. We were curious if anyone on MT would be interested in buying some stronger studs. The standard length we're cutting them will be 35mm however we can take requests to cut special lengths.

To cover our costs and time to cut and finish these studs we're looking at selling them for $5 a piece plus $5 to ship them. So 4 studs will run $25.00 shipped Priority Mail to your door step.

Any takers?

Stephanie Turner

We sell those same studs at $1.25 each. The are 8 mm x 1.25 x 35 OAL, American grade 10.8. This is a fairly standard item and should not be so expensive.
Stephanie

triple88a

iTrader: (2)

Stephanie, do you also have the studs for the regular Begi S kit downpipe? I believe they are 43mm long.

I have a set of 35s at home that are way way too short.

msydnor

iTrader: (3)

You can also get them at most auto parts stores. They are behind the counter items at advance auto.

triple88a

iTrader: (2)

i gotta try advanced auto, vatozone had no idea what studs even are.. they led me to the regular cheap steel bolts..

msydnor

iTrader: (3)

I bought mine at advance. 8mm 1.25 studs.

triple88a

iTrader: (2)

How long?

Reverend Greg

iTrader: (3)

McMaster-Carr
Less than 2bucks each and long enough for what you need,And if you live In Atlanta,you can go pick them up.Mcmaster-Carr is an excellent resource for industrial grade ****.
-G--

jcocke

iTrader: (3)

Thank god someone else knows about McMaster...whenever I need anything, that is the first place I go. I'd be willing to bet money its where most of the aftermarket tuner places get their "hard-to-find" things and just mark it up 200-300%.

triple88a

iTrader: (2)

We got a Mcmaster carr 10 minutes away from my house

crnrhrd

well damn I searched locally for these things but couldn't find anything higher than grade 5.8....Stephanie PM sent.

msydnor

iTrader: (3)

Just take your one of you studs with you and mach them up. I've had the once I got from advance on my car for over a year with no issues. I think they are actually the carberator stud.

cardriverx

iTrader: (12)

Thaat place is the ****, they even have 3d models of most their stuff that I can use when making parts for the FSAE car.

slutz4

iTrader: (3)

A nice hardware store should carry them (prolly something better than home depot)