oil feed line? where to get them
06-22-2007, 07:41 PM
#1
Elite Member
Thread Starter
iTrader: (7)
Join Date: Jan 2007
Location: Renton Washington
Posts: 1,731
Total Cats: 4
oil feed line? where to get them
Hi ive been putting on my turbo kit and got all the intercooler pipes situated and only need a few more things. i do NOT have the complete oil feed line from the turbo to the block. does anyone have a place to buy them. i also need the fittings for the oil return line. as i have the steel braided hose but neither of the parts that attach to the hose from the turbo or from the block. PLEASE SOMONE HELP ME. 
Reply
0
0
06-22-2007, 07:56 PM
#3
Elite Member
Thread Starter
iTrader: (7)
Join Date: Jan 2007
Location: Renton Washington
Posts: 1,731
Total Cats: 4
greddy kit td04 15g
i found the dimensions of the pipe but now i need to know wher to order them help?
The outlet at the engine block is M10x1.5 thread. The inlet on the turbo is M10x1.25 thread.
A common aftermarket trick is to use an M10 to -4AN banjo fitting at the block, a -4AN hose with standard -4AN ends (one angled, one straight), a -4AN elbow, and then another -4AN to M10 banjo at the turbo inlet.
i found the dimensions of the pipe but now i need to know wher to order them help?
The outlet at the engine block is M10x1.5 thread. The inlet on the turbo is M10x1.25 thread.
A common aftermarket trick is to use an M10 to -4AN banjo fitting at the block, a -4AN hose with standard -4AN ends (one angled, one straight), a -4AN elbow, and then another -4AN to M10 banjo at the turbo inlet.
Last edited by SKMetalworks; 06-22-2007 at 08:55 PM. Reason: adding info
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM
stoves
Suspension, Brakes, Drivetrain
5
04-21-2016 03:00 PM
JesseTheNoob
DIY Turbo Discussion
15
09-30-2015 02:44 PM
