Masking frontend on track without masking tape
#1
Elite Member
Thread Starter
iTrader: (24)
Join Date: Jun 2007
Location: Woodland Hills, CA
Posts: 4,667
Total Cats: 18
Masking frontend on track without masking tape
My '94 is fresh out of paint booth with a 2 stage paint (AK 30mm fenders and quarter panels). I would really like not to get any rock chips for at least 6 months.
Has anyone tried any products besides masking tape? Here are options I'm considering:
The goal is not to look like a blue tape maniac.
Has anyone tried any products besides masking tape? Here are options I'm considering:
- Plasti dip
- Road Wrap
The goal is not to look like a blue tape maniac.
#3
As a body man that knows quite a bit about paint, I would go for the Road Wrap for a few reasons.
1. Its a lot tougher than plastidip. At speed, a rock or debris can chew right through plastidip and into the paint quite easily. I have rarely taken road wrap off the front of a car and seen any rock chips under it. And that's on high mileage cars here in Michigan, where the highways may as well be dirt instead of concrete.
2. Plastidip is known to discolor or "bite into" fresh clear coat. Depending on the quality or chemical makeup of your clear coat it could take up to 2 months for it to cure fully. I wouldn't put plastidip over anything that wasn't over a year old yet.
Regardless of what you choose, don't put anything on it for at least 30 days from the date it was painted, gas pockets are still exiting the clear and you don't want to trap them.
-FlyingBrick
1. Its a lot tougher than plastidip. At speed, a rock or debris can chew right through plastidip and into the paint quite easily. I have rarely taken road wrap off the front of a car and seen any rock chips under it. And that's on high mileage cars here in Michigan, where the highways may as well be dirt instead of concrete.
2. Plastidip is known to discolor or "bite into" fresh clear coat. Depending on the quality or chemical makeup of your clear coat it could take up to 2 months for it to cure fully. I wouldn't put plastidip over anything that wasn't over a year old yet.
Regardless of what you choose, don't put anything on it for at least 30 days from the date it was painted, gas pockets are still exiting the clear and you don't want to trap them.
-FlyingBrick
#4
Elite Member
Thread Starter
iTrader: (24)
Join Date: Jun 2007
Location: Woodland Hills, CA
Posts: 4,667
Total Cats: 18
As a body man that knows quite a bit about paint, I would go for the Road Wrap for a few reasons.
1. Its a lot tougher than plastidip. At speed, a rock or debris can chew right through plastidip and into the paint quite easily. I have rarely taken road wrap off the front of a car and seen any rock chips under it. And that's on high mileage cars here in Michigan, where the highways may as well be dirt instead of concrete.
2. Plastidip is known to discolor or "bite into" fresh clear coat. Depending on the quality or chemical makeup of your clear coat it could take up to 2 months for it to cure fully. I wouldn't put plastidip over anything that wasn't over a year old yet.
Regardless of what you choose, don't put anything on it for at least 30 days from the date it was painted, gas pockets are still exiting the clear and you don't want to trap them.
-FlyingBrick
1. Its a lot tougher than plastidip. At speed, a rock or debris can chew right through plastidip and into the paint quite easily. I have rarely taken road wrap off the front of a car and seen any rock chips under it. And that's on high mileage cars here in Michigan, where the highways may as well be dirt instead of concrete.
2. Plastidip is known to discolor or "bite into" fresh clear coat. Depending on the quality or chemical makeup of your clear coat it could take up to 2 months for it to cure fully. I wouldn't put plastidip over anything that wasn't over a year old yet.
Regardless of what you choose, don't put anything on it for at least 30 days from the date it was painted, gas pockets are still exiting the clear and you don't want to trap them.
-FlyingBrick
#9
I would 110% recommend this product.
Invisible Mask - Clear Bra Automotive Paint Protection, 3M Scotchgard, Carbon Fiber 3M Films
Click on Shop Our Store and then Catalog #1. Find your model. It's really hard to work with, but if you take your time, follow the directions and use a blow drier to help tack spots, it turns out really nice.
I'm pretty confident with the material because I've been using the same crap on my cell phones for years. It's just massively bigger.
I know the picture is washed out a bit, but you in your own eyes, you can barely tell there's anything there. If you want me to get some more better pics, let me know.
Invisible Mask - Clear Bra Automotive Paint Protection, 3M Scotchgard, Carbon Fiber 3M Films
Click on Shop Our Store and then Catalog #1. Find your model. It's really hard to work with, but if you take your time, follow the directions and use a blow drier to help tack spots, it turns out really nice.
I'm pretty confident with the material because I've been using the same crap on my cell phones for years. It's just massively bigger.
I know the picture is washed out a bit, but you in your own eyes, you can barely tell there's anything there. If you want me to get some more better pics, let me know.
#11
Boost Czar
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,508
Total Cats: 4,080
#12
Moderator
iTrader: (12)
Join Date: Nov 2008
Location: Tampa, Florida
Posts: 20,675
Total Cats: 3,017
My car came with one of these when I bought it. Yes, they still make them. Yes, I still have it on a shelf.
LeBra Front End Cover
LeBra Front End Cover
Thread
Thread Starter
Forum
Replies
Last Post