Will a Super Cheap Hardtop Work for Track Days?
#1
Senior Member
Thread Starter
iTrader: (18)
Join Date: May 2008
Location: Big Bear Ca
Posts: 988
Total Cats: 8
Will a Super Cheap Hardtop Work for Track Days?
I have a chance to possibly grab a really good condition aftermarket HT for $225. I know it's not legal for spec Miata, any ideas on it's legality for track days or perhaps Miata challenge? SoCal tracks/events.
Thanks
Thanks
#8
Senior Member
Thread Starter
iTrader: (18)
Join Date: May 2008
Location: Big Bear Ca
Posts: 988
Total Cats: 8
No pics, at work till Monday. It basically looks like an OEM top, except it stops just forward of the frankinstein bolts, and has some ***** little attachment hardware.
I know about leaking issues, and other drawbacks to some of these aftermarket tops, I was just picking it up for mainly track duty. I'd probably beef up the attachment points at some point.
I know about leaking issues, and other drawbacks to some of these aftermarket tops, I was just picking it up for mainly track duty. I'd probably beef up the attachment points at some point.
#10
Supporting Vendor
iTrader: (3)
Join Date: Jul 2006
Location: San Diego
Posts: 3,303
Total Cats: 1,216
I think bellwilliam is the one who recently debuted his carbon hardtop which is like one layer at most and only weighs some ridiculous amount, like 8 pounds or something. You can literally flex it by just pushing on it with your hand. If that can be used, you're good.
#13
Elite Member
iTrader: (15)
Join Date: Dec 2007
Location: San Antonio, Texas
Posts: 4,847
Total Cats: 27
The rules may vary in your HPDE area but yes you can use a cheap non-stock hard top. I have one of the Chaser Aero carbon hard tops on my track car (much lighter than stock) and never get asked about it, even by NASA Tech. As long as it is strong enough to hold on at speed you should be OK.
+1 You definitely want a roll bar for safety. They are required here for convertibles in HPDE.
Also FYI if you are just trying to stiffen the chassis, the hard top will help, but door bars are much more effective in my experience.
+1 You definitely want a roll bar for safety. They are required here for convertibles in HPDE.
Also FYI if you are just trying to stiffen the chassis, the hard top will help, but door bars are much more effective in my experience.
#17
If you get this hardtop I'd suggest getting Mazda latches for it. I bought a hardtop with my last miata and didn't realize it wasn't the stock latches. After 45 minutes on the interstate at 68mph it flew off and almost went through the driver behind me. That was an expensive lesson, as it snapped off the rear latch as it came off (was not able to attach back to the car). The root cause was the driver's side front latch slipped and air got under it. It came off as fast as losing your hat at 68mph.
#18
Senior Member
Thread Starter
iTrader: (18)
Join Date: May 2008
Location: Big Bear Ca
Posts: 988
Total Cats: 8
Yeah, I heard those latches are only rated to 67 mph
I was planning on upgrading the latches.
I just bought a new gun, he said he'd hold it till next paycheck, hopefully he'll hold onto it. I'll post up picks if I get it.
I was planning on upgrading the latches.
I just bought a new gun, he said he'd hold it till next paycheck, hopefully he'll hold onto it. I'll post up picks if I get it.
#19
if you don't want it, send me a link, I will buy it.
you just need to make sure it is bolted down. use those SM hard top brackets, they work.
only thing that matters is that it doesn't fly off when doing 100MPH. Trackspeedengineering installed my super light/flimsy hard top. it worked in the last 2 enduro races. so you might want to ask Sav to install it for you if you have any doubts.
you just need to make sure it is bolted down. use those SM hard top brackets, they work.
only thing that matters is that it doesn't fly off when doing 100MPH. Trackspeedengineering installed my super light/flimsy hard top. it worked in the last 2 enduro races. so you might want to ask Sav to install it for you if you have any doubts.
#20
If you get this hardtop I'd suggest getting Mazda latches for it. I bought a hardtop with my last miata and didn't realize it wasn't the stock latches. After 45 minutes on the interstate at 68mph it flew off and almost went through the driver behind me. That was an expensive lesson, as it snapped off the rear latch as it came off (was not able to attach back to the car). The root cause was the driver's side front latch slipped and air got under it. It came off as fast as losing your hat at 68mph.
For an added safety measure, I have safety wired the side latches closed & safety wired the top to the car. (I don't take the top off much in the summer, and it makes it a bitch to steel lol )