miata NA.. mazdaspeed 3 brake transplant
#1
miata NA.. mazdaspeed 3 brake transplant
hi
I am doing a MazdaSpeed 3 brake transplant onto a miata 92 NA.
Still in process...... need to make a bracket for it that is it......
what do you guys think? ............
pictures show
- xxr 002 16x8 0 offset
- mazdaspeed 3 front brake rotor 12.6" re drilling rotor from 5x114.3 to 4x100 to fit my miata
- mazdaspeed 3 caliper
IMAG0128.jpg?t=1284307331
IMAG0122.jpg?t=1284307331
I am doing a MazdaSpeed 3 brake transplant onto a miata 92 NA.
Still in process...... need to make a bracket for it that is it......
what do you guys think? ............
pictures show
- xxr 002 16x8 0 offset
- mazdaspeed 3 front brake rotor 12.6" re drilling rotor from 5x114.3 to 4x100 to fit my miata
- mazdaspeed 3 caliper
IMAG0128.jpg?t=1284307331
IMAG0122.jpg?t=1284307331
#9
Cpt. Slow
iTrader: (25)
Join Date: Oct 2005
Location: Oregon City, OR
Posts: 14,209
Total Cats: 1,139
Doubt it, practically looks like he photoshopped them into his 16" wheels. Pictures of the setup without the wheel? And I can a Ferrari F50 caliper and disc inside a wheel, the bracket is always the hard part, what are your plans? Any pictures of the caliper next to the miata hub?
#11
The MS3 has a really nice caliper, and the rotor is plenty big. I wouldn't want a rotor that heavy on my Miata.
I believe the MS3 caliper has a 57mm piston (going from memory here, not looking it up). That's roughly equivalent to a 38-42mm four-piston caliper. Put it on a 320mm rotor with a 60mm tall pad, and you get 77% more torque at the wheels for every pound on the brake pedal. Might as well just cap the rear lines and send both m/c outputs to the front. (Before actually does that, they better look up sarcasm on Wikipedia.)
I believe the MS3 caliper has a 57mm piston (going from memory here, not looking it up). That's roughly equivalent to a 38-42mm four-piston caliper. Put it on a 320mm rotor with a 60mm tall pad, and you get 77% more torque at the wheels for every pound on the brake pedal. Might as well just cap the rear lines and send both m/c outputs to the front. (Before actually does that, they better look up sarcasm on Wikipedia.)
#12
The MS3 has a really nice caliper, and the rotor is plenty big. I wouldn't want a rotor that heavy on my Miata.
I believe the MS3 caliper has a 57mm piston (going from memory here, not looking it up). That's roughly equivalent to a 38-42mm four-piston caliper. Put it on a 320mm rotor with a 60mm tall pad, and you get 77% more torque at the wheels for every pound on the brake pedal. Might as well just cap the rear lines and send both m/c outputs to the front. (Before actually does that, they better look up sarcasm on Wikipedia.)
I believe the MS3 caliper has a 57mm piston (going from memory here, not looking it up). That's roughly equivalent to a 38-42mm four-piston caliper. Put it on a 320mm rotor with a 60mm tall pad, and you get 77% more torque at the wheels for every pound on the brake pedal. Might as well just cap the rear lines and send both m/c outputs to the front. (Before actually does that, they better look up sarcasm on Wikipedia.)
Thread
Thread Starter
Forum
Replies
Last Post
Frank_and_Beans
Supercharger Discussion
13
09-12-2016 08:17 PM