Hot_Wheels

iTrader: (12)

I have a AEM EMS I just picked up, I also have a 1993 Miata harness. I plan on installing this into my festiva with a b6t (same as b6de).

What I wanted to do is have the harness trimmed down and cleaned up, remove A/C,emmision, and.MAF wirring.
Would like a harness made to add a Map sensor,toyota cops harness (i have the connectors and capacitors) add IAT sensor wiring, and add wiring for boost solenoid.

I might have been better off buying the universal standalone but oh well.

If you can help me, let me know how much. I can send everything associated with the wiring, I may need to source a TPS and IAC plug i think these where cut off from the harness.

THanks
Rick

Hot_Wheels

iTrader: (12)

to the top

falcon

iTrader: (13)

I did mine myself. If you have the patience, you can do it without experience. Remove the harness, de loom it and start tracing wires. It takes time but is easy once you get the hang of it.

blaen99

iTrader: (6)

+1

Building a harness is NOT hard. It's just time consuming.