Project Cheap
Thread Starter
I'm Miserable!
Joined: Jun 2009
Posts: 1,866
Total Cats: 0
From: albany, ga
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Reply
1
1
Reply
1
1
Thread Starter
I'm Miserable!
Joined: Jun 2009
Posts: 1,866
Total Cats: 0
From: albany, ga
Reply
1
1
Thread Starter
I'm Miserable!
Joined: Jun 2009
Posts: 1,866
Total Cats: 0
From: albany, ga
Reply
1
1
Thread Starter
I'm Miserable!
Joined: Jun 2009
Posts: 1,866
Total Cats: 0
From: albany, ga
Reply
1
1
Thread Starter
I'm Miserable!
Joined: Jun 2009
Posts: 1,866
Total Cats: 0
From: albany, ga
By techsalvager at 2011-12-02
By techsalvager at 2011-12-02
By techsalvager at 2011-12-02
By techsalvager at 2011-12-02
Reply
1
1
Thread Starter
I'm Miserable!
Joined: Jun 2009
Posts: 1,866
Total Cats: 0
From: albany, ga
Reply
1
1
Thread Starter
I'm Miserable!
Joined: Jun 2009
Posts: 1,866
Total Cats: 0
From: albany, ga
Reply
1
1
Thread Starter
I'm Miserable!
Joined: Jun 2009
Posts: 1,866
Total Cats: 0
From: albany, ga
Reply
1
1
Thread Starter
I'm Miserable!
Joined: Jun 2009
Posts: 1,866
Total Cats: 0
From: albany, ga
still working on it, trying to figure out best ways for air ducting before I do any cutting.
This way if I have to just rip it off because I wasn't happy with the results I will with a still functioning bumper.
This way if I have to just rip it off because I wasn't happy with the results I will with a still functioning bumper.
Reply
1
1
Thread Starter
I'm Miserable!
Joined: Jun 2009
Posts: 1,866
Total Cats: 0
From: albany, ga
no idea yet, still working on mainly just reliability mods for the car. Thinking about cutting into the hood and making a place for air to exit right behind the radiator.
Also I ordered in an EGT Gauge and Sensor!
Also I ordered in an EGT Gauge and Sensor!
Reply
1
1
Thread Starter
I'm Miserable!
Joined: Jun 2009
Posts: 1,866
Total Cats: 0
From: albany, ga
My CAS wheel came in.
I'll let some of the pics do the talking.
But one issue I see is that the wheel is a tad thinner compared to the stock wheel and also a lot more flimsy. Not sure on the replacement size of the Nissan wheels but diyautotune might want to make a thicker wheel. I need a caliper to measure the actual size difference. Since its flimsy compared to stock its rubbing aganist the black plastic of the reader. Its a tight fit and I used the stock one to push it down with equal force onto the shaft as not to bend it.
By techsalvager at 2011-12-24
By techsalvager at 2011-12-24
By techsalvager at 2011-12-24
I'll let some of the pics do the talking.
But one issue I see is that the wheel is a tad thinner compared to the stock wheel and also a lot more flimsy. Not sure on the replacement size of the Nissan wheels but diyautotune might want to make a thicker wheel. I need a caliper to measure the actual size difference. Since its flimsy compared to stock its rubbing aganist the black plastic of the reader. Its a tight fit and I used the stock one to push it down with equal force onto the shaft as not to bend it.
By techsalvager at 2011-12-24
By techsalvager at 2011-12-24
By techsalvager at 2011-12-24
Reply
1
1
