How to rewire adaptronic for a 1.6 to 1.8 swap? - Miata Turbo Forum - Boost cars, acquire cats.

Welcome to Miataturbo.net   Members
 


Reply
 
 
 
LinkBack Thread Tools Search this Thread
Old 07-22-2011, 08:28 AM   #1
Junior Member
Thread Starter
iTrader: (2)
 
Join Date: Sep 2009
Location: singapore
Posts: 228
Total Cats: 2
Default How to rewire adaptronic for a 1.6 to 1.8 swap?

I was running adatronic plug and play for my 1.6 miata. I am currently doing a 1.8 swap. Since there is no more distributor in the 1.8 engine, how do I connect to the cas now? What do I do with this plug? I am guessing it's the cam angle sensor?

Attached Thumbnails
How to rewire adaptronic for a 1.6 to 1.8 swap?-b02d17f9.jpg  
nismo502 is offline   Reply With Quote
Old 07-22-2011, 09:44 AM   #2
Junior Member
Thread Starter
iTrader: (2)
 
Join Date: Sep 2009
Location: singapore
Posts: 228
Total Cats: 2
Default

I ought to mention, i found this while searching through the forum.

-Hook the crank sensor signal wire into the OEM harness' Crank input (2E, White wire)
-Hook the cam sensor signal wire (from the valve cover sensor) into the OEM harness' Cam input (2G, Yellow/Blue wire)

Does anyone have the directions to the plug side? That is, how to tap the wires from the plug rather than from the ecu?
nismo502 is offline   Reply With Quote
Old 07-25-2011, 08:21 AM   #3
Senior Member
 
Join Date: Dec 2004
Location: Brisbane, Australia
Posts: 1,272
Total Cats: 32
Default

The old engine didn't have a distributor either. You can cheat and fit the NA CAS to the NB engine, but the triggering won't be as accurate.

Cheers
timk is offline   Reply With Quote
Old 07-25-2011, 09:54 AM   #4
Junior Member
Thread Starter
iTrader: (2)
 
Join Date: Sep 2009
Location: singapore
Posts: 228
Total Cats: 2
Default

Oops my bad, not distributor. Anyway, I wanted to replace the old NA cas for the newer nb cam and crank position sensor for the same reason.
nismo502 is offline   Reply With Quote
 
 
Reply

Related Topics
Thread Thread Starter Forum Replies Last Post
Noob to Miataturbo from MA JxPhan Meet and Greet 3 10-02-2015 03:17 AM
Going back to stock. Need some 1.6 parts. Trent WTB 2 10-01-2015 01:15 PM
Low oil pressure after 1.8 swap and new turbo setup JesseTheNoob DIY Turbo Discussion 15 09-30-2015 03:44 PM
wiring wideband ground to battery terminal btabor ECUs and Tuning 10 09-28-2015 06:33 PM


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



All times are GMT -4. The time now is 04:29 AM.