Using MegaLogViewer with Adaptronic logs
Try not starting the log until the ecu is powered on. I think that will keep WARI from putting rows of "-" at the beginning of the log. That's how I do it and I've never had any trouble with my logs in MLV. MLV doesn't have an issue with "-" showing up once the log has started.
Reply
0
0
That is what I have been doing. I'll have the ECU on, car running, then start the log, then start MLV live trail.
It is an Eee PC with 2GB ram running XP and a 160 GB HD.
It is an Eee PC with 2GB ram running XP and a 160 GB HD.
Reply
0
0
Joined: Jun 2005
Posts: 19,338
Total Cats: 574
From: Fake Virginia
did a boatload of "live logging" tonight. works as described. worked for 50 minutes straight. tolerated the car dying and restarting. pretty cool. much easier to use than the adaptronic software's dashboard.
Reply
0
0
As long as you don't turn the key to off, it will generate one continuous log.
Reply
0
0
OK I figured it out. It was indeed a personal problem 
I had the AFR and lambda sensors checked for the LC-1. No need for that, so I unchecked them both. Also I had tab delimited set (default), so I changed that to comma delimited. Now it works great. I ran a live trail for about 35 minutes, no hiccups.
I am not sure which if the settings caused the problem, but whatever, it is working now.
I had the AFR and lambda sensors checked for the LC-1. No need for that, so I unchecked them both. Also I had tab delimited set (default), so I changed that to comma delimited. Now it works great. I ran a live trail for about 35 minutes, no hiccups.
I am not sure which if the settings caused the problem, but whatever, it is working now.
Reply
0
0
Senior Member
Joined: Dec 2004
Posts: 1,278
Total Cats: 37
From: Brisbane, Australia
http://tim.kent.googlepages.com/Adap...gConverter.vbs
Converts log files from Adaptronic so they work in MegaLogViewer without modification to properties file. Also removes any lines without data.
USAGE: Drag and drop Adaptronic log file(s) onto this script, it will write the changes back to the original file(s).
Let me know what you think!
Reply
0
0
Senior Member
Joined: Dec 2004
Posts: 1,278
Total Cats: 37
From: Brisbane, Australia
I had some logs where I had switched the car off with the Adaptronic software still running. It was choking on the empty lines.
I'll update the script to replace any instance of "-" with "0", after the empty lines have been removed.
I'll update the script to replace any instance of "-" with "0", after the empty lines have been removed.
Reply
0
0
