Gauges for EMS-4?
#1
Senior Member
Thread Starter
iTrader: (12)
Join Date: May 2008
Location: Roselle, Illinois
Posts: 849
Total Cats: -34
Gauges for EMS-4?
ok so i bought a ems-4 due to i wanted to run flex fuel. I found out that the data stream gauges i bought wont work with the EMS-4!! I liked thed idea of the data stream gauges sharing the sending unit with the EMS, and everything would also be data logged. Being that i cant use that is there any other gauges i can use in conjunction with the ecu's sending units? is there anything that will stream the info from the EMS-4 other then a computer? I was thinking digital dash but is there a affordable version? Will megaviewer work with EMS-4?
#4
ok so i bought a ems-4 due to i wanted to run flex fuel. I found out that the data stream gauges i bought wont work with the EMS-4!! I liked thed idea of the data stream gauges sharing the sending unit with the EMS, and everything would also be data logged. Being that i cant use that is there any other gauges i can use in conjunction with the ecu's sending units? is there anything that will stream the info from the EMS-4 other then a computer? I was thinking digital dash but is there a affordable version? Will megaviewer work with EMS-4?
EB Turbo
#5
Senior Member
Thread Starter
iTrader: (12)
Join Date: May 2008
Location: Roselle, Illinois
Posts: 849
Total Cats: -34
EB checking the AEM forum they keep talking about the new beta testing for the software to run flex fuel. The software is way over due i think it was suppose to be out in April? There was a rumor they may not release it due to they where pushing there new ECU. Who is your source? Il have to go back on the forum and read up. If this is true im going to be supper pissed because i went from the AEM pnp to the EMS-4 just so i can run flex fuel. I got $1500 in aem ecus! megasquirt ftw?
#7
The Firmware between the Series II and the EMS-4 are different. I am a beta tester for AEM. AEM directly told me no flex fuel support for the EMS-4. This is not a 100% final decision but my source is really creditable. I have a miata that runs an EMS-4 that besides a Flex sensor and ECU capability is ready for Flex Fuel. I am pretty disappointing that there is no support. The only thing I can do is switch to a Series II EMS.
What type of gauges are you looking for? The only thing available is an aftermarket dash display that has CAN capability. They are easy options to install you just need to spend $1k-3k to get one.
EB Turbo
What type of gauges are you looking for? The only thing available is an aftermarket dash display that has CAN capability. They are easy options to install you just need to spend $1k-3k to get one.
EB Turbo
#8
Former Vendor
iTrader: (31)
Join Date: Nov 2006
Location: Sunnyvale, CA
Posts: 15,442
Total Cats: 2,100
Just wondering why you weren't contacting the vendor you bought the ECU from for support. Sorry he left you high and dry. There are plenty of shops that will sell you an EMS-4 with no support (as you've unfortunately discovered) but we're the only shop selling a Miata-specific PnP package with basemaps and continued support.
#9
Just wondering why you weren't contacting the vendor you bought the ECU from for support. Sorry he left you high and dry. There are plenty of shops that will sell you an EMS-4 with no support (as you've unfortunately discovered) but we're the only shop selling a Miata-specific PnP package with basemaps and continued support.
EB Turbo
#10
Former Vendor
iTrader: (31)
Join Date: Nov 2006
Location: Sunnyvale, CA
Posts: 15,442
Total Cats: 2,100
This is why AEM is trying to keep ecu sales to vendors who stand by the min retail prices and who actually support the product they sell. When vendors and eBay people sell under min retail and dont support their customers it only takes money out of the pockets of AEM and the real vendors who actually spend supporting their customers.
#11
Supporting Vendor
iTrader: (1)
Join Date: Sep 2010
Location: Lake Forest, CA
Posts: 7,956
Total Cats: 1,008
So, resurrecting an old thread....
Andrew, if you were to design the ultimate gauge setup for the EMS-4, what would you do?
I'm trying to figure out an optimal gauge solution, but a combination of my noobishness and an unfamiliarity with my car make it so I'm not even sure where to start. My car has the Greddy profec EBC, and a spa gauge showing oil pressure and coolant temp on the steering column (which is annoying).
I need boost and AFR readouts.
So, should I re-mount the Greddy and use that for boost, and just get a UEGO?
OR is there another, better solution?
If you can point me towards your installation instructions for stuff like this, that'd be hugely helpful so i can understand what I'm looking at as I dig around under this thing.
Andrew, if you were to design the ultimate gauge setup for the EMS-4, what would you do?
I'm trying to figure out an optimal gauge solution, but a combination of my noobishness and an unfamiliarity with my car make it so I'm not even sure where to start. My car has the Greddy profec EBC, and a spa gauge showing oil pressure and coolant temp on the steering column (which is annoying).
I need boost and AFR readouts.
So, should I re-mount the Greddy and use that for boost, and just get a UEGO?
OR is there another, better solution?
If you can point me towards your installation instructions for stuff like this, that'd be hugely helpful so i can understand what I'm looking at as I dig around under this thing.
Thread
Thread Starter
Forum
Replies
Last Post
Zaphod
MEGAsquirt
47
10-26-2018 11:00 PM
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM
JesseTheNoob
DIY Turbo Discussion
15
09-30-2015 02:44 PM