Bell Tuning & Performance

Bell Tuning & Performance has all the DIY turbo kit parts you need! We sell most everything by itself or in a kit. We have these parts and much more:
*Engine block fittings
*Turbo fittings - Garrett, Chinese, T3s, MSM IHI Turbo
*Oil lines
*Gauge mounts
*Manifolds
*Downpipes
*Coolant re-route parts
*Mounting Hardware
*MSPNP
*Turbos - Garrett & Chinese options available! They come clocked and ready to install on manifolds with 10mm studs. The Chinese turbos come with the oil inlet fitting installed.

We have hundreds of fittings in stock! If you need an odd fitting or a kit with a couple of fittings changed, don't hesitate to call or email. We can also make custom oil and coolant lines. With spools of stainless lines, -4 & -8 fittings, and a hydraulic crimping machine, we can make any length of line you need.

http://www.belltuning.com
Stephanie

18psi

iTrader: (76)

that manifold you have pictured, do you have those in stock?
like if a person ordered it right now, would they have a tracking number in their email tomorrow morning?

Bell Tuning & Performance

Depending on which manifold was ordered, yes. Below is what is in stock today, what shipped this week, and what is due in next week. If a T3 manifold was ordered, it would be about 1 week lead time.

In stock:
*2001-2005 Manifold with EGR and T25 Flange (the uncoated one in the photo)
*1.6L Manifold with T25 flange in stock

Shipped this week:
*a 1.8L Manifold with T25 flange and no EGR w/ EGT Bung
*Two black ceramic coated manifolds pictured above
*2001-2005 Manifold with EGR and T25 Flange

We have more T25 Flange 1.8L Manifolds with no EGR due in Tuesday from CNC. CNC is producing two to three manifolds a week, but that can be increased at any time if needed. We have over 40 1.8L castings in stock ready for machining. We are doing our best to stock them, but with 12 different configurations available, we are stocking the ones we sell the most of.
Stephanie