'94 SR20T25 Turbo Miata
8 Attachment(s)
Hey everyone! Over the next few weeks I will be embarking in my first turbo build (don't give me too much credit a shop is doing most the work) so I wanted to have a place to document my progress and ask any questions without flooding the boards with new threads.
Background: About a 2 years ago i bought a 2013 Scion FRS which opened my eyes up to the joys of a lightweight nimble cars. The problem was every mod i wanted to do to the car was breaking the bank. Pretty much everything was going to cost me ~1000 per upgrade and it got me thinking, maybe I don't need a new expensive car to mod, maybe I should give this miata thing a try. So that's what I did. I put my sweet new supercharged FRS for sale and went looking for a cheap little NA miata. FRS: Attachment 235084 After selling the FRS I bought my first miata. It was a modded 96 with a maacco paint job and stripped interior. Attachment 235085 I loved the car and used it to get into autox and I was hooked. I attended every autox event this year and thought the car was a blast to drive. The problem was I hated the aesthetics of the car and how aged it was. It was on its second engine and had about 200k on the dinged up body. That is when I found my current miata. I found this car 10 hours after it was posted on craigslist. It was a bone stock 94 with 50k miles and 1 owner. Day of purchase: Attachment 235086 I spent the next week swapping over the parts I wanted to keep and then put the 96 up for sale. I brought over the wheels, tein flex coilovers, racing beat tubular front sway bar, and nb2 seats I had purchased. I changed all the fluids, bought a nardi wheel, a motiv shift knob and a hard top to top her off. Thats where she sits today. Current miata: Attachment 235087 Attachment 235088 Attachment 235089 Attachment 235090 I have loved racing the miata in the str class but now that the season is over and I have learned a ton I started to miss having power. So that brings us to today. I did a ton of research on turbo miatas and finally bit the bullet on a used kit. Here is a list of parts I got. FM Manifold/2.5" Downpipe Trackspeed Engineering 10MM inconel studs with locking hardware installed FM 2.5" downpipe trans tunnel brace FM Silicone intercooler piping FM turbo intake Turbosmart recirculating valve Ebay Intercooler (has a dented tube from a something hitting it, but is only cosmetic.) SR20 T25 rebuilt before installation with new 7psi Garrett wastegate FM turbo heatshield ACT Clutch Fidanza Flywheel RX7 Injectors MSPNP2 by Brain Which arrived today!! Attachment 235091 Well that's my intro. I will use the rest of the thread to ask questions and post updates. I would love some advice from everyone as this is my first build and dont want to repeat mistakes others have made. |
Misleading title is misleading.
Expected an SR20 engine install. C |
Yeah. I was prepared for major failure, but this should be okay!
|
Originally Posted by chriscar
(Post 1178363)
Misleading title is misleading.
Expected an SR20 engine install. C |
Originally Posted by chriscar
(Post 1178363)
Misleading title is misleading.
Expected an SR20 engine install. C |
Where in PA
|
Originally Posted by RedCarmel
(Post 1178423)
Where in PA
|
1 Attachment(s)
Wow 4 months later but it's done!! Pics to come after I wash off all the dust. Here is the important part. 217whp/227wtq at 14psi
Attachment 235083 |
Originally Posted by gr4v3r
(Post 1204237)
Wow 4 months later but it's done!! Pics to come after I wash off all the dust. Here is the important part. 217whp/227wtq at 14psi
https://i.imgur.com/XGWEUjO.jpg |
This makes me very excite, because I've been worried that a non-99/vvt head on a 1.8 swap would be fail boat. But those are pretty good numbers.
Anything done to the head? Porting? Intake manifold mods? Stock throttle body? |
Originally Posted by curly
(Post 1204287)
This makes me very excite, because I've been worried that a non-99/vvt head on a 1.8 swap would be fail boat. But those are pretty good numbers.
Anything done to the head? Porting? Intake manifold mods? Stock throttle body? |
Originally Posted by shuiend
(Post 1204265)
I seriously miss my old 94 with my SR20 t25 setup. That dyno is just about perfect for a street car.
|
You have also created a tickle in my pickle. My setup is similar minus the displacement so naturally the dyno looks like my 1.6 except elevated 40 digits and more fun in low rpms. This is what I expect with my 1.8 swap this spring. Vids needed!
Originally Posted by gr4v3r
(Post 1204301)
I cant wait till it gets warmer. Its hard to enjoy it with the cold weather. 0 traction in 1st-2nd
|
Originally Posted by petrolmed
(Post 1204313)
You have also created a tickle in my pickle. My setup is similar minus the displacement so naturally the dyno looks like my 1.6 except elevated 40 digits and more fun in low rpms. This is what I expect with my 1.8 swap this spring. Vids needed!
It's bittersweet though because you lose some of the acceleration the cold air brings. It's noticeable on a hot day. |
Not sure how I missed the thread but that was a gorgeous FRS.
|
Originally Posted by bahurd
(Post 1204328)
Not sure how I missed the thread but that was a gorgeous FRS.
|
Congrats on the very nice results. The torque curve looks like it will be a blast around town.
|
Nice. I put down 225 on a similar setup a few years ago so your #'s are spot on.
PS love the FRS, I DD a BRZ |
Originally Posted by 240_to_miata
(Post 1205983)
Nice. I put down 225 on a similar setup a few years ago so your #'s are spot on.
PS love the FRS, I DD a BRZ |
the cool thing about t25's is you can slap in a 2560 or 2860 and retain everything else, and voila - instant topend gains without giving up almost any of the lowend. win/win
|
All times are GMT -4. The time now is 12:25 AM. |
© 2024 MH Sub I, LLC dba Internet Brands