Aidan's loose oily bunghole actually runs a track lap
#2843
SadFab CEO
iTrader: (3)
Join Date: Sep 2012
Location: your mom's house phoenix, AZ
Posts: 4,560
Total Cats: 1,142
Looks like the 06 was its own rotor, as in, it only fits an 06. Lets try to stick with something that might not be really hard to find later.
like the 07-13 S rotor
Seriously, I have to go work now.
#2845
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
<p>Ok, I like the 07-13 s rotor. Just got off the phone with used calipers guy. Said he had a pile of them and would try and find what I needed.</p>
#2846
Elite Member
iTrader: (37)
Join Date: Apr 2010
Location: Very NorCal
Posts: 10,441
Total Cats: 1,899
Again, just for clarity, Bundy is using a radial mount Dynapro from a modified Mini Cooper big brake kit, with 2 piece Wilwood rotors.
The brackets I got from relete are for the Dynalite using an OEM Mini rotor (PNs and dims above.)
So similar projects, but not the same.
The brackets I got from relete are for the Dynalite using an OEM Mini rotor (PNs and dims above.)
So similar projects, but not the same.
#2850
Elite Member
iTrader: (37)
Join Date: Apr 2010
Location: Very NorCal
Posts: 10,441
Total Cats: 1,899
Here, just to make sure we have that same link posted in this thread 4 times in the last hour: https://www.miataturbo.net/race-prep...corrado-68784/
#2854
SadFab CEO
iTrader: (3)
Join Date: Sep 2012
Location: your mom's house phoenix, AZ
Posts: 4,560
Total Cats: 1,142
<p>So were basically reinventing @relte's wheel. I'm going to PM him and see if he still has the 11.5inch rotor bracket hanging around.</p>
#2857
I never made it to the 11.5" bracket since all I could fit under NB 15" wheels were the 11" rotors. I thought about trying the 11.5" under my new Konig Dail-ins, but I would need a thick wheel spacer to clear that big of a rotor. My main design goal was to fit the biggest rotor I could under factory wheels for cheap. If you can fit the 11.5" rotor you can probably fit the big boy 11.75 rotors from the big brake kits. Also the 11.5 rotor gets pretty heavy, especially compared to willwood rotors. I can dig up the data if you need it.
#2858
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
<p>I thought you got the 11.5 to almost fit under stock nb.</p><p>We should check the wilwood rotor offset.</p><p>I know that even 15x9's need a spacer to clear the stock wilwood hat.</p>
#2860
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
<p>Also the main purpose of this is price.</p><p>11.75 rotor is not even remotely close to cheap.</p><p>The way I see it is:</p><p>Bracket: Freeish</p><p>Rotor: 44</p><p>Calipers: 300 max</p><p>Lines: ~40</p><p>So 400 instead of 729?</p><p>V8R has their own custom hat.</p>